Primus Cable FB33-2232 Fiber Fusion Splicer - Greenlee, Fusion Splicer, Fiber Cleaver, Splice on Connectors Carrying Case
- SKU: FB33-2232
- Manufacturer: OWL
- Data Sheet: Download
- Availability: Pre Order Now!
|Applicable Fibers||SM (G.652), MM (G.651), DS (G.653), NNZDS (G.655), BIF (G.657)|
|Cladding Diameter||80 to 150um|
|Display||5.7" Color, Turn-over LCD|
|Environmental Conditions||14°F to 122°F (-10°C to +50°C), Humidity 0 TO 95%, Pressure 0 TO 16, 404' (0 TO 5000M) Above Sea Level|
|Extra Monitor Connection||No|
|Power Supply||100 to 240VAC, Li ION Battery|
|Protection Sleeve Length||60mm, 40mm, micro sleeves|
|Splice Loss||0.02dB (SM), 0.01dB (MM), 0.04dB (DS), 0.04dB (NZDS)|
|Splice Connector||SC and LC|
|Splice Time||9 Seconds|
|Storage of Splice Results||5000|
|Tube Heating Time||36 Seconds|
Greenlee 910FS Fusion Splicer
The Greenlee Communications 910FS Optical Fiber Fusion Splicer is intended to fuse fibers, resulting in low splice loss and long-term stable splices. Splice loss depends on certain conditions such as fiber preparation, splicing parameters, and fiber condition.
The standard principle of splicing is not complicated: first the splicer finds the fiber core and aligns it correctly, and then it splices the fiber with the arc generated by the electrodes. There are two main technologies to ensure high-quality splice —LID (Local Injection and Detection) and CDS (Core Detection System), which is also widely known as PAS (Profile Alignment System).
The 910FS with PAS technology is designed for splicing many types of optical fibers. It is small in size and lightweight, making it suitable for any operating environment. It is easy to operate, and it splices fast while maintaining low splice loss.