Rohn Turnbuckle, HDG, 3/8"X 6" Eye & Jaw
- SKU: 3/8TBE&J
- Manufacturer: Rohn
- Data Sheet: Download
Product Information
Rohn 3/8TBE&J Turnbuckle, HDG, 3/8"X 6" Eye & Jaw
Federal Spec FF-T-791B Type 1 Form 1; Forged, Hot Dip Glavanized, Open Body, Working Load Limit: 1200 lbs., Ultimate Strength: 6000 lbs
Note: Typical Use: when attaching and tensioning ROHN Tower and Telescopic Antenna Mast Down Guy terminations (3/16" Strand via Pre-formed deadend and 5/16THH, 1/4" Bare Strand via Cable Clamps and 5/16THH, or 618/620 Bare Wire via Cable Clamps/Gripple and 1/4TH) to Closed Hole or Integral Equalizer Plate Anchors (like GAS4303/EZ 30 or GAC3455). Will NOT fit a GAR30 Anchor. 6,000 lbs. Ultimate Strength. Eye to Jaw Turnbuckles typically attach the Tower Down Guy Strand (via a Big Grip Pre-Formed Dead-End and a Heavy Open Thimble) on one end to the Down Guy Equalizing Plate or Closed Single Eye Anchor (the ones that have Holes as the attachment Method, ie; R-GAS4303 and R-GAC3455) on the other end. Consult ROHN Catalog Links at Footer Section below for ROHN 25G 45G 55G 65G Tower Guy wire Details for Various Wind Loads.
Features :
- Forged hot dip galvanized open body
- Working load limit 1200 lbs
- Ultimate strength 6000 lbs
Specifications
Specifications ROHN 3/8TBE&J
Type | Eye & jaw turnbuckle |
Size | 3/8" wire |
For | 25/45/55/65 series tower |
Application | Hardware & accessories |
Depth | 12.5" |
Width | 1.7" |
Height | 0.8" |
Weight | 0.95 LB |