The POE-MSPLT line of dynamic splitters are compact Power over Ethernet adapters which splits the Data and PoE power onto separate output connectors and converts the active PoE (IEEE802.3af/at) input into a regulated DC output voltage. The DC output is provided on a standard 5.5mm/2.1mm barrel connector and the Data output is provided on standard RJ45 network connector, each on a dedicated 6” cable. In addition to being compatible with 10/100MB Ethernet speeds, inputs and outputs are isolated and the devices include protections for short circuit and overload.
The unique POE-MSPLT-USB provides a USB output to power smartphones and tablets from PoE devices like network switches or PoE injectors.
The TP-DCDC-HP Series of DC to DC converters offered by Tycon Power Systems are a low cost and high reliability solution for those requiring 24VDC or 56VDC Power Over Ethernet voltage from a 12V, 24V or 48V battery system. They have an integrated POE injector. Passive POE and 802.3at models are available. They have two inputs for connecting 2 power sources, like a primary and backup power source.
They accept data-in to a shielded RJ45 Jack and provide data-out and POE power on the shielded RJ45 output jack. They work by supplying power on the unused Ethernet pins 4,5(V+) and 7,8(V-). They have various protections for surge, short circuit and overload. The units have a power output of up to 35W. The input and output are isolated so the units can accept minus voltage on input and can be wired for positive voltage on the output for those systems which are negative voltage based.
If the remote device does not support power over Ethernet, splitters (POE-SPLT-S) are available to split the data and DC voltage at the remote device. If the remote device requires reverse voltage the POE-XOVER-S cable can be used.
DC Input: 10V to 32VDC
DC Output: 5VDC @ 3A
The TP-VR series of sealed DC to DC regulators offer high output regulation in a compact sealed enclosure. They have 12" long 18AWG leads on input and output for universal connectivity.
The TP-VR-2405-DC is a sealed DC to DC regulator which offers high output regulation in a compact sealed enclosure.
They have 12" long 18AWG leads on input and 14” 18AWG wire with 5.5/2.1 DC Barrel connector on output.
The TP-VR-2405-USB USB Thingy™ is a USB power adapter that provides 1A of USB power from a 10-32VDC input. It is perfect for providing a high power USB port in all kinds of situations from vehicles to stationary remote power systems.
The USB port is becoming a standard battery charging port for all kinds of electronic devices including cell phones, smartphones and tablets. The USB Thingy™ can be connected directly to a 12V solar panel (10W or higher) for charging USB powered devices directly from the sun. Output cable is 152mm (6”) long terminated in USB-A type connector.
The TP-VRHP-1224 is a 70W voltage converter/regulator which accepts an input of plus or minus 10VDC to 15VDC and provides a regulated output of 24VDC @ 1.25A 70W. These units are perfect for providing 24VDC voltage from 12VDC battery sources like in a vehicular application or remote power. Input and outputs are wire terminals for wire up to 12AWG. Operates from -30 to +65 deg C.
The TP-VRHP series of DC to DC converters offer high output voltage conversion in a compact metal enclosure. They have wire terminal inputs and outputs for maximum flexibility. The units come with DIN rail adapters for DIN rail mounting. They provide power output up to 250W.
Input Voltage: 277-280VAC 50/60Hz
Input Current: 1.5A @ 277VAC At Full Load
Input Connector: 48VDC
The TP-VC277-220VAC voltage converter changes 277VAC to 220VAC 400W.
277VAC is a voltage commonly found on light poles, including light poles on streets and parking lots. This voltage is typically too high to run common equipment such as outdoor UPS systems, security cameras and wireless equipment. By converting the voltage to 220VAC, most common equipment can be powered. The TP-VC277-220VAC provides a respectable 400W output.
The voltage converter has an integrated circuit breaker to protect against short circuits and other current overloads. It operates over a wide temperature range making it suitable for industrial applications.
Multiple configurations are available for 12V or 24V systems with various battery storage capacities.
The TP-VC277-220VAC is compatible with Tycons TP-BC series of battery chargers. It is also compatible with Tycon’s 300W Outdoor UPS Systems like UPS-ST12-200, UPS-ST24-100 or UPS-ST48-50.