Digital Loggers Regulated Smart Midspan 24V PoE Injector with Auto-Reboot
Product Information
Digital Loggers 24V WISP AP PoE Injector
Regulated Smart Midspan 24V PoE Injector with Auto-Reboot
Eliminate POE problems. Restart WiFi APs and links automatically. Improve customer service and satisfaction. This regulated 8-port 24 volt POE midspan injector is built specifically for Ubiquiti, Alfa, Tranzeo, Microtik, EnGenius and similar radios and IP cams that require clean, well regulated 24V POE on a 10/100 interface.
AutoPing Reboot with Tough PoE
The injector will automatically sense when an IP device goes down and reboot by power cycling. Scripting, syslog, Auto-Pingautomatic reboot, and WOL support are standard features in every injector. Utilities like our new email alerter are free.
Ideal for WISPs
Simplify installations. Reduce cabling and clean up your installations. Eliminate the bulky UPS, separate POE injectors and power switchgear. One compact unit controls and reboots your radios securely from any web browser. Removable rack/wall mount brackets are included.
Eliminate the UPS
Directly connect a pair of 12V batteries for uninterrupted power without a separate UPS. The injector senses both battery and AC power, switching instantly to the best power source. The built-in smart charger will float and trickle charge anything from small gel-cells to a pair of car batteries. For quick recharge, fast chargers can be added externally. An updated design with dual voltage regulators ensures that sensitive radios like UBNT receive precisely regulated and protected power.
Remote Power Control, Voltage Montoring, Reboot, and New! Reset-to-Defaults
Monitor battery and PoE voltages remotely via the web. Remotely reset radios that support reset-to-defaults over Ethernet. Remotely sense AC power status. The injector will run on AC, DC, or both. Solar and wind systems are easy to connect. The injector is ideal for remote radio sites running only on DC power.
150W Power, Fast Surge Suppression
Power surges, static, and nearby lightning can damage radios. 18 separate surge suppressors including Gas-tube, SIDAC, and self-resetting fuse protectors provide clean, safe PoE to keep your equipment running rock-solid. The injector combines a passive 150W power injector -plus- an smart active current monitor that detects and corrects overloads. Get reliable operation through power surges and brown-outs, even on 802.3af POE+ equipment that may not negotiate reliably on other injectors and switches. Since even a small surge or over-voltage can destroy 24V devices, the injector provides regulated 24.0VDC at the ports, protecting outdoor devices on longer cable runs.
Specifications
Specifications 24VPOE
| AC Fusing | Internal 2.5A, UL Power Supply |
| Alert Beeper | 63dBa at 12" Script controlled |
| Applications | Equipment control and reboot |
| Control / Display | Reset -to-factory-default switch |
| Dimensions (Product) | Outside 6.25x17.00x1.75" |
| EEPROM (I2C) | 256Kb standard, larger optional |
| Enclosure | Aluminum chassis, double grounded. 4 redundant fans |
| FCC Testing | Part 15 S/D |
| Humidity | 8-80% RH Operating |
| Input Frequency | 50-400Hz |
| Input Power Cord | 6' 18AWG UL CSA L-15 |
| Input Voltage | 90-130VAC or 200-240VAC |
| Operating Temperature | -30º to 170ºF, -34º to 77ºC |
| Power Supply Rating | 90-120V, or 200-240V Factory selectable - internal switch |
| Port Power (RJ-45) | -25W / 1A max per port, automatic current limiting |
| Power Switching | 8 individually switched POE |
| Power Dissipation | 188W Max (full load w/ charger |
| Remote Reset | Works with UBNT and similar APs |
| Surge Protection | Dual Gas Discharge Tube Fast 5000W TVS on POE Lines |