• Home
  • APC Smart-UPS SRT 1000VA RM 120V

APC Smart-UPS SRT 1000VA RM 120V

(0)No Reviews yet

Out of Stock

Call for Availability

Product Information


APC Smart-UPS SRT 1000VA RM 120V

High density, double-conversion on-line power protection with scalable runtime

Includes: CD with software, Documentation CD, Installation guide, Rack Mounting brackets, Rack mounting hardware, Rack Mounting support rails, USB cable, Warranty


  • Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • ECO Mode Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
  • LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms.
  • Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.

Smart-UPS On-Line Features & Benefits

  • Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Disconnected battery notification Warns when a battery is not available to provide backup power.
  • Audible alarms Provides notification of changing utility power and UPS power conditions
  • Predictive failure notification. Provides early-warning fault analysis ensuring proactive component replacement.
  • User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)


  • Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
  • Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP.
  • Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.


  • Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.
  • Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Scalable runtime Allows additional run time to be quickly added as needed. Automatic restart of loads after UPS shutdown
  • Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
  • Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault.


  • SmartSlot: Customize UPS capabilities with management cards.
  • InfraStruXure Manager Compatible: Enables centralized management via the APC InfraStruXure Manager.
  • Serial connectivity: Provides management of the UPS via a serial port.
  • LED status indicators: Quickly understand unit and power status with visual indicators.
  • Network manageable: Provides remote power management of the UPS over the network.

Marketing features

  • Save time with easy and convenient remote/network accessibility. Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
  • Avoids costly power problems by keeping your IT equipment and data protected and available . Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
  • Low operating and maintenance costs with proven reliability and intelligent battery management . Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
  • Peace of mind that comes with full equipment compatibility and reliability of a leader Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry’s most rigorous standards.


  • Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
  • Power conditioning : Protects connected loads from surges, spikes, lightning, and other power disturbances.
  • Input Power Factor Correction: Minimizes installation costs by enabling the use of smaller generators and cabling.
  • Safety-agency approved :Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • Cold-start capable: Provides temporary battery power when the utility power is out.
  • Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  • Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used.


Specifications KPPA-2GHZDP65S-WOC1

Output power capacity 900Watts / 1.0kVA
Max Configurable Power (Watts) 900Watts / 1.0kVA
Nominal Output Voltage 120V
Output Voltage Distortion Less than 2%
Output Frequency (sync to mains) 50/60Hz +/- 3 Hz
Load Crest Factor 3 : 1
Topology Double Conversion Online
Waveform type Sine wave
Output Connections (6) NEMA 5-15R (Battery Backup)
Bypass Built-in Bypass
Nominal Input Voltage 120V
Input frequency 40 - 70 Hz (auto sensing)
Input Connections NEMA 5-15P
Cord Length 6ft (1.83meters)
Input voltage range for main operations 50-150 (40% Load), 80 - 150V
Number of Power Cords 1
Batteries & Runtime
Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Included Battery Modules 1
Typical recharge time 3hour(s)
Nominal Battery Voltage 48V
Replacement Battery APCRBC155
Expected Battery Life (years) 3 - 5
RBC Quantity 1
Battery Charge Power (Watts) 102Watts
Extendable Run Time 1
Battery Volt-Amp-Hour Capacity 306
Extended Run Options APC-Smart-UPS-SRT-1000VA-RM-120V (Available in Technical Tab on site)
Runtime View Runtime Graph (Available in Technical Tab on site) View Runtime Chart (Available in Technical Tab on site)
Efficiency View Efficiency Graph (Available in Technical Tab on site)
Communications & Management
Interface Port(s) RJ-45 Serial, Smart-Slot, USB
Control panel Multi-function LCD status and control console
Audible Alarm Audible and visible alarms prioritized by severity
Emergency Power Off (EPO) Yes
Available SmartSlot™ Interface Quantity 1
Surge Protection and Filtering
Surge energy rating 432Joules
Maximum Height 3.35inches (85MM, 8.5CM)
Maximum Width 17.0inches (432MM, 43.2CM)
Maximum Depth 20.0inches (508MM, 50.8CM)
Rack Height 2U
Net Weight 48.5lbs. (22.0KG)
Shipping weight 65.26lbs. (29.6KG)
Shipping Height 9.7inches (246MM, 24.6CM)
Shipping Width 23.4inches (594MM, 59.4CM)
Shipping Depth 29.5inches (749MM, 74.9CM)
Color Black
Units per Pallet 12.0
Operating Temperature 32 - 104 °F (0 - 40 °C)
Operating Relative Humidity 0 - 95 (non-condensing) %
Operating Elevation 0-10000ft (0-3000meters)
Storage Temperature -20 - 50 °C
Storage Relative Humidity 0 - 95 (non-condensing) %
Storage Elevation 0-50000ft (0-15000meters)
Audible noise at 1 meter from surface of unit 50.0dBA
Online thermal dissipation 317.0BTU/hr
Protection Class IP 20
Approvals CSA C22.2 No.107.3-05, ENERGY STAR V2.0 (USA), FCC Part 15 Class A, UL 1778
Standard warranty 3 years repair or replace (excluding battery) and 2 years for battery
Sustainable Offer Status
RoHS Compliant
Proposition 65 Warning Available in Documentation tab


Ratings & Reviews

No reviews available

Be the first to Write a Review