• Home
  • Cambium 5GHz 60° Sector Antenna (+FSK)

Cambium 5GHz 60° Sector Antenna (+FSK)

(0) No Reviews yet
  • SKU: 85009325001
  • Manufacturer: Cambium Networks
  • Data Sheet: Download
  • Availability: Open chat or call usEmail me when this product is in stock!
$495.00

Specifications 85009325001

OFDM FSK
Frequency Range 5.4-6.0 GHz 5.4-6.0 GHz
Antenna Type Access Point Sector Access Point Sector
Gain 17 dBi +/- 1 dBi 10 dBi +/- 1 dBi
VSWR 1.5:1 max 1.5:1 max
Port To Port Isolation >30 dB to all ports >30 dB to all ports
3dB Beamwidth-Azimuth 45° 60°
3dB Beamwidth-Elevation 50°
Elevation Null FillDown to -25° N/A
1st Null -18dB min N/A
2nd Null -33dB min N/A
3rd Null -36dB min N/A
Azimuth SidelobesETSI EN 302.326-3 SS2 ETSI EN 302.326-3 SS1
Polarization Dual Linear, Horizontal / Vertical Linear, Vertical
Maximum Input Power 30 W 10 W
Input Impedance 50 Ohms 50 Ohms
Front-to-Back Ratio>35 dB >35 dB
Cross Polarization >25 dB >20 dB
Dimensions (HxWxD) (mm) 468 x 146 x 64468 x 146 x 64
Antenna Weight (kg) 2.8 kg, w/o bracket kit 2.8 kg, w/o bracket kit
Antenna Connector 3 x N-Type Female, Straight 3 x Type N Female, Straight
Wind Survival 216 km/h 216 km/h
Pole Mounting Hardware Quick Release, 1.5” to 4.5” Dia. Pole Quick Release, 1.5” to 4.5” Dia. Pole
Mechanical Downtilt 0° to 11° 0° to 11

Cambium Networks 85009325001

5 GHz - 60° Sector Antenna (+FSK)

Each AP can provide a specific sector size or area of coverage. PMP 450 APs are connectorized radios and can support any coverage you need. However, we recommend using the AP with the high-performance antennas that have been developed specifically for the PMP 450 product – either a 6-sector dual mode (both FSK and OFDM) or a 4-sector OFDM antenna. Your individual network and configuration may require a different sector width. If alternative configurations are needed, be sure that local regulations are followed prior to purchase.

Note that the N-type to N-type cable required to connect the AP to the antenna is not included and must be purchased separately. For an OFDM-only deployment, you will need two cables, one for the horizontal and one for the vertical OFDM polarities. If you are deploying in the Combo mode (i.e., serving both FSK and OFDM subscribers), you will need three of these cables. Each antenna is supplied with a bracket for mounting to a pole that is 2 inches (50 mm) to 3 inches (75 mm) in diameter.

Ratings & Reviews

No reviews available

Be the first to Write a Review