Cambium ePMP 2000 5GHz AP Sync ROW (US Cord)
|Channel Spacing||Configurable on 5 MHz increments|
|Frequency Range||5150 – 5970 MHz (exact frequencies as allowed by local regulations)|
|Channel Width||5 | 10 | 20 | 40 MHz|
|MAC (Media Access Control) Layer||Cambium Proprietary and optionally standard 802.11n|
|Physical Layer||2x2 MIMO/OFDM|
|Ethernet Interface||100/1000BaseT, rate auto negotiated, 802.3at compliant|
|Powering Methods Supported||56 V PoE (included), standard 802.3at PoE Supply, or CMM4 with 56 V and 5 pin to 7 pin cross over cable adapter|
|Protocols Used||IPv4, UDP, TCP, IP, ICMP, SNMPv2c, HTTPs, STP, SSH, IGMP Snooping|
|Network Management||HTTPs, SNMPv2c, SSH|
|VLAN 802.1Q with||802.1p priority|
|Subscribers per Sector||Up to 120, Lite version limited to 10|
|Nominal Receive Sensitivity (w/FEC) @ 20 MHz Channel||MCS0 = -93 dBm to MCS15 = -69 dBm (per branch)|
|Nominal Receive Sensitivity (w/FEC) @ 40 MHz Channel||MCS0 = -90 dBm to MCS15 = -66 dBm (per branch)|
|Modulation Levels (Adaptive)||MCS0 (BPSK) to MCS15 (64QAM 5/6)|
|GPS Synchronization||Yes, via Internal GPS or CMM4 with 56 V and 5 pin to 7 pin cross over cable adapter|
|Quality of Service||Three level priority (Voice, High, Low) with packet classification by DSCP, COS, VLAN ID, IP & MAC Address, Broadcast, Multicast and Station Priority|
|Antenna||Sector Antenna (C050900D021A) Available|
|Transmit Power Range||0 to +30 dBm (combined, to regional EIRP limit) (1 dB interval)|
|Sector Antenna Connection||2 x 50 ohm, RP (Reverse Polarity) SMA|
|Beamforming Antenna Connection||2 x 50 ohm, RP (Reverse Polarity) SMA, DC Coupled (powering antenna)|
|GPS Antenna Connection||1 x 50 ohm, RP (Reverse Polarity) SMA|
|Surge Suppression||1 Joule Integrated|
|Temperature||-30oC to +55oC (-22oF to +131oF)|
|Power Consumption||20 W Maximum |
|Input Voltage||44 V to 59 V|
|Weight||0.7 kg (1.5 lbs) without brackets|
|Dimensions (L x W x H)||22.2 x 12.4 x 4.5 cm (8.75 x 4.9 x 1.75 in) without brackets|
|Encryption||128 bit AES (CCMP mode)|
|CE||EN 302 502 v1.2.1 EN 301 893 v1.7.1|
Cambium Networks C050900A131A
ePMP 2000 5GHz AP Sync ROW (US Cord)
ePMP 2000 Access Point Radio with Intelligent Filtering
The ePMP 2000 Access Point System consists of a high performance, GPS Synchronized Access Point Radio with Intelligent Filtering, a new compact high performance Access Point Antenna and an optional Smart Beamforming Antenna.
The Intelligent Filtering of the Access Point works for both receive and transmit. It protects any channel from noise from off-channel interferers with a filter that dynamically moves around the channel. On the transmit side, it protects the RF environment by reducing off-channel transmission noise.
The Smart Beamforming capability works to mitigate the effects of on-channel interference. The System learns the locations of each served Subscriber Module and forms a narrow beam towards the desired Subscriber Module while that radio is transmitting in the uplink. This reduces the gain on the uplink for on-channel interferers that are transmitting at an azimuth angle different than the Subscriber Module.
When deployed with a sector antenna, the ePMP 1000 GPS Sync Radio can be configured as a GPS Synchronized Access Point serving ePMP Integrated Radios configured as Subscriber Modules. When deployed with a high gain point to point antenna, the ePMP GPS Sync Radio can be configured to be a GPS Synchronized Backhaul Master, forming a PTP link with another ePMP Radio module.
- Frequency Reuse: Supports GPS Synchronization and SM Transmit power control to allow for Frequency Reuse
- Unmatched Performance and Scalability: With the efficient Cambium MAC protocol and advanced air-fairness scheduler up to 120 simultaneously active Subscriber Modules can be served without performance degradation.
- Industry-Leading Interference Tolerance: The Intelligent Filtering capability on the Receive side makes the ePMP 2000 immune to the effects of strong off-channel interferers and on the Transmit side serves to reduce off-channel noise for better radio co-location.
- Supports up to 120 Subscriber Modules
- Supports a wide frequency range: 5150 – 5970 MHz
- 802.3at compliant 100/1000BaseT Interface