Global Telcom Cat15-4X4 ODU with 4 Directional Antennas With Wall Mount And Pole Mount. B48. Ant 17 dBi
Product Information
- Specifications
- Description
Specifications GLODU7243AB48
| Dimensions | 305 mm (L) x 275 mm (W) x 142 mm (H) |
| Weight | < 3 kg |
| Power Consumption | < 15 W |
| Power Supply | 48 V / 0.5 A DC (Gigabit PoE) |
| Environmental | |
| Operating Temperature | -50°C to 72°C |
| Humidity | 95% max (non-condensing) |
| LTE Radio Interface | |
| Radio Access | 3GPP Release 13 Category 12 |
| Operation Mode | DL 4x4 MIMO / QAM256 Inter & Intra Band CA (4CC) |
| Frequency Band | B5 / 12 / 17 / 26 / 71 (2T4R) B2 / 4 / 25 / 41 / 66 (2T8R) |
| Output Power | 23 dBm per Tx (2Tx) |
| Antenna | B48 17 dBi (4 directional antennas) |
| User Interfaces | |
| Data Interface | 1 RJ45 10 / 100 / 1000 Mbps ETH |
| LED Indicators | PWR / SYS / NET / SIM / ETH / RF (5 signal intensity LEDs) |
| SIM Support | SIM card slot (2FF) |
| Networking Configuration | DHCP or static IP address assignment Bridge and router operation support Built-in DHCP server for LAN devices IPv4 and IPv6 DS-Lite support Multiple PDN interface support NTP service support SIM card locking Network selection and cell locking provision |
| Data Networking Features | VPN pass-through support (PPTP, L2TP & IPsec) Built-in L2TP & GRE tunneling clients Firewall & access control DMZ and virtual server support IP and port filtering support Local and remote management restriction Application firewall support LAN device access control |
| Device Management | CLI, Telnet, HTTP and HTTPS management interfaces Standard-based OMA-DM or TR-069 management FTP and HTTP OTA firmware upgrade USIM and network PLMN locking support Factory default settings |
| Industry Standards | |
| ITU 3GPP | Release 13 |
| IEEE | |
| IEEE 802.3 | 10Base Ethernet |
| IEEE 802.3u | Fast Ethernet |
| IEEE 802.3ab | Gigabit Ethernet |
| OTHERS | |
| Water Resistance | IP67 |
| Safety | FCC or CE |
Global Telecom GLODU7243AB48
Cat15-4x4 ODU with 4 Directional Antennas with wall Mount and Pole Mount. B48. Antennas Gain: 17 dBi Includes SAS Cert
Global Telecom’s TITAN 4000 is an advanced LTE Cat 15 outdoors unit designed to meet the most challenging demands for high-speed wireless backhaul, fixed wireless and failover deployments. The TITAN 4000 supports FDD & TDD band operations with multiple operator networks across the nation. It uses a Gigabit PoE connection between terminal devices, such as indoor routers or WiFi AP products. The PoE interface can also work with standard PoE switches or router products. The product comes with a PoE power adapter and mounting bracket accessories for quick self-installation.
High Performance & Lightning Speed Mobile Data
The TITAN 4000 is designed to withstand the most difficult outdoors operations conditions and can safely operate in a wide temperature range from -50°C to 72°C. It meets industrial IP67 water and dustproof standard requirements with MTBF times expected to be above 80,000 hours. Depending on the network configuration and DL/UL split ratio configuration, the unit can provide up to 600 Mbps maximum throughput over the air. The typical coverage area can reach 15 km with reasonably good throughput performance.
Easy and Quick Setup
The TITAN 4000 is a user-friendly LTE CPE that’s easy to install and maintain -– it’s a fully integrated solution with all necessary device drivers pre-loaded. Simply connect the device to a computer or home switch/router and the device is ready for surfing the internet. LED indicators offer device operation information and IP addresses can be dynamically obtained via DHCP. Rich control features support local management access, Telnet, Http, Https and standard TR069 remote OTA management (including device configuration, monitoring and upgrades).
Technical Features
The design is based on LTE release 13 specifications with 4x4 MIMO, carrier aggregation and QAM64 modulation on the uplink. The TITAN 4000’s highgain directional patch antenna enables an extended reception that yields more efficient use of the network, a larger cell reach, guaranteed carrier class service, and customer service availability. Advanced Orthogonal Frequency Division Multiplexing (OFDM) modulation enhances performance in non-line-of-sight (NLOS) conditions to significantly reduce interference and multi-path conflicts typical of deployments in densely populated urban areas. Sophisticated QoS capabilities ensure true endto-end QoS and support high-quality data service.
Features:
- Cost effective & compact design with built-in high-gain LTE antenna
- Compliant with 3GPP Release 13 standards (Cat12)
- 4T8R radio design
- DL 4x4 MIMO, CA (up to 4CC) and QAM256 support
- UL QAM64, UL CA and MIMO support
- Router and bridge operation mode support
- IPv4 & IPv6 and multiple PDN support
- PPT, L2TP and GRE VPN tunneling client support
- FTP, HTTP, OMA-DM and TR-069 management