ICT Intelligent 1U Power Shelf with Load Distribution Module (-48V)
- SKU: ICT-IPSe-LDM
Product Information
ICT Innovative Circuit Tech ICT-IPSe-LDM
Intelligent 1U Power Shelf with Load Distribution Module (-48V)
The ICT Modular Power Series 2 provides up to 4,500 watts of hot swappable, managed DC power critical communication networks. Available for 48-, 24- or 12-volt DC applications, the Modular Power Series 2 DC power system is preconfigured at the factory to provide fast, easy installation at the site.
The Intelligent Control Module with Gigabit Ethernet provides full remote monitoring and control of all system functions, and supports 10-, 100-, and 1000- megabits per second speeds.
The Battery Management Module provides a 150-amp low voltage disconnect, single or dual 100-amp battery breakers with advanced battery management functions for both sealed lead acid and lithium-ion battery types, including battery state of charge, estimated run time remaining, and battery discharge testing. An RS-485 MODBUS interface provides direct communication with battery management systems (BMS) of supported lithium-ion batteries, reporting of battery conditions and alarms directly from the BMS.
Up to two Load Distribution Modules can be factory installed for supporting up to eight load devices. Rated at 20 amps max. each, every output can monitor and report load current conditions, and individual outputs can be remotely power cycled manually, or based on user-defined criteria, reducing site visits and operating costs, and increasing network uptime.
The ICT Modular Power Series 2 is designed, manufactured and supported in North America to meet the need for wireless communications, broadband and other critical DC power applications.
Features:
- Supports up to three hot-swappable DC power modules
- Available with 1500-, 1000- and 700-watt DC power modules
- Supports 48-, 24- or 12-volt applications
- TCP/IP Ethernet is standard with support for 10/100/1000 Mbps speeds provides full remote monitoring and power control capabilities via SNMP or graphical user interface (GUI)
- Battery Management Module provides single or dual 100-amp battery breakers with comprehensive battery management of sealed lead acid and lithium-ion battery types
- Dedicated RS-485 MODBUS interface connected directly with supported lithium-ion batteries, allowing direct reporting of battery conditions through SNMP or GUI
- Load Distribution Module provides four breaker-protected outputs with comprehensive remote monitor of each output, and full remote ON/OFF control of each individual output
- Digital inputs for monitoring and reporting environmental alarms, such as smoke, fire, and door alarms
Specifications
Specifications ICT-IPSe-BMMLP
| Dimension | 20" x 22" x 4" inch |
| Weight | 18 inch |
| Mechanical | |
| AC Input Connectors (dual) | 3-pin removable plug, cage clamp type 8–22 AWG |
| DC Output Connector | Bus Bar, 5/16-inch bolt hole |
| Ethernet Connector | RJ-45 |
| Alarm Output Connector | 3-pin removable plug, cage clamp type 16–24 AWG |
| Mounting | 1RU, 19 in. rack mount |
| Environmental | |
| Operating Temperature Range | -30° to +60° C |
| Output Derating | 2% /° C (above 50° C) |
| Storage Temperature | -45° to +85° C |
| Regulatory | |
| Safety | UL/CSA 62368-1 |
| Emissions | ICES-003, FCC Part 15/B, EN 61000-6-2, EN 61000-6-3, EIC 61000-4-5, CE, RCM and RoHS (700 W), ICES-003, FCC Part 15/B, EN 61000-6-1, EN 61000-6-3, EIC 61000-3-2, EIC 61000-3-3, CE, RCM and RoHS (1000 W), ICES-003, EN55032, EN 61000-3-2, EN 61000-3-3, IEC 61000-4-5, CE, RCM and RoHS (1500 W) |
| Communications | |
| Remote Communications | TCP/IP Ethernet 10/100/1000 BASE-T |
| Battery Communications | RS-485 MODBUS to connect to battery BMS |
| I.P. Protocols | 10/100/1000 BASE-T, HTTPS, HTML, SNMP v1/v2c/v3 |
| Battery Management | |
| Battery Circuit Breaker | Single or Dual 100A |
| Low Voltage Disconnect | 50A contactor |
| Battery Terminal | Busbar with 3/8″ bolt |
| Warranty | Two year warranty |