• Home
  • Jaton Tec CAT7 Outdoor CPE LTE MIMO Antennas

Jaton Tec CAT7 Outdoor CPE LTE MIMO Antennas

  • SKU: JT6300D
  • Manufacturer:
  • Data Sheet: Download
  • Availability: Please Contact us for AvailabilityEmail me when this product is in stock!
US$‎380.00

Specifications JT6300D

LTE RADIO INTERFACE
Radio Access 3GPP Release 10, Category 7
Operation Mode FDD/TDD
Frequency Band B7/B38/B40/B41, B42/B43/B48
Channel BW 5/10/20MHz and CA support
MIMO Support 2Tx 4Rx, or 2Tx 2Rx, DL 4*4 MIMO, UL 2*2 MIMO QAM64 DL 2*2 MIMO CA(2CC), UL 2*2 MIMO QAM64
Max Tx Power 23dBm per antenna port
Antenna Gain B7/38/40/41 14dBi(2*2 CA), 10dBi(4*4 MIMO)B42/43/48: 17dBi(2*2 CA), 13dBi(4*4 MIMO)
PHYSICAL & ENVIRONMENTAL
Power DC 48V/0.5A PoE <15W (Gigabit PoE)
Weight <2.5Kg
Dimensions 250mm (L) * 250mm(W) * 75mm(D)
Environment Operating Temperature, -40℃~55℃. Humidity, 95% max Non-condensing
Water Protection IP 67
USER INTERFACE
Data Interface 1 RJ45 10/100/1000M ETH Port
LED Indicator PWR, SYS, NET, SIM, ETH, RF(5 Signal intensity LEDs)
SIM Card Single SIM card slot (2FF)

Jaton Tec JT6300D

CAT7 Outdoor CPE LTE MIMO Antennas

JATONTEC 6300D is highly advanced TD-LTE CAT7 outdoor data unit specially designed to meet the most challenging demands of today’s high speed wireless backhaul and fixed wireless access deployments by the 4G service operators. The unit can support multiple TDD band operations. Multiple operator network support can also be provisioned on the unit to allow the deployment across entire country with different operators.

JT6300D provides Gigabit PoE connection to connect user terminal device such as router or Wi-Fi AP products. The unit PoE interface can also work with standard PoE switches or router products. The product comes with PoE power adapter and mounting bracket accessories for quick self-installation.

RELIABLE PERFORMANCE

JT6300D is designed to meet the stringent operation environment for outdoor CPE devices. The device can safely operate in a wide temperature ranging from -40 to +55 degree and meets industrial IP67 water and dust proof standard requirements. The device MTBF time is expected to be above 80,000 hours. Depending on the network configuration and DL/UL split ratio configuration, the unit can provide up to 300Mbps max throughput over the air. The typical coverage should be more than 15km with reasonable good throughput performance.

EASY USAGE & MANAGEMENT

JT6300D is a user-friendly LTE CPE that is easy to install and maintain. The unit is fully integrated and comes with all the necessary device drivers pre-loaded. Subscribers just connect the device to their computer or home switch/router and the device is ready to offer an experience of surfing over Internet. The LEDs on the JT6300D have also been designed for user convenience, and offer a clear sign of what the device is doing. The IP addresses can be dynamically obtained via DHCP.

JT6300D offers rich management features which facilitate the task of carrier. It supports local management access, Telnet, Http, Https and standard TR069 remote OTA management including device configuration, monitoring, and upgrades management

TECHNICAL FEATURES

JT6300D design is based on the standard implementation of LTE release10 specification. It is able to meet the most demanding requirements of large service providers with high throughput and availability.JT6300D is a CAT7 CPE and supports advance features such as 2x2 MIMO, Carrier Aggregation, QAM64 modulation on the uplink.

With high gain directional patch antenna.JT6300D enables a longer reception range from the base station. This yields more efficient use of the network with a larger cell reach, guaranteed carrier class service, and customer service probability. Advanced Orthogonal Frequency Division Multiplexing (OFDM) modulation enhances performance in non-line-of-sight (NLOS) conditions to ensure immunity to interference and multi-path conflicts typical of deployments in densely populated urban areas. Moreover, sophisticated QoS capabilities ensure true end-to-end QoS and support high quality data services.


Key Benefits:

  • Cost effective & compact design with built-in LTE MIMO antennas.
  • Compliant to 3GPP LTE Release10
  • Advanced 2x2 MIMO, DL & UL CA, and UL QAM64 support (CAT7)
  • Router and bridge operation mode support
  • Support L2TPV3,PPTP and GRE VPN Tunneling clients
  • Support secure Telnet, FTP, HTTP and TR069 remote OTA management
  • Support IPv4&IPv6 and Multiple PDN