KP Performance KPPA-22.5-3GHZDPFHA-4-PACK
- SKU: KPPA-22.5-3GHZDPFHA (4 Pack)
- Manufacturer: KP Performance
- Data Sheet: Download
- Availability: Pre Order Now!
|WIND LOADING SPECS||Wind Speed Load On Antenna Load (Newtons) 60 Kmph 14.0 lbs 62.5 N 80 Kmph 25.0 lbs 111.0 N 100 Kmph 39.0 lbs 173.5 N 120 Kmph 56.2 lbs 249.8 N 140 Kmph 76.4 lbs 340.0 N|
|Frequency range||3300-3800 MHz|
|Polarization||V+H or +-45° slant|
|Beamwidth 3dB||12.3 °|
|Return loss||> 14 dB|
|F/B ratio||> 32 dB|
|Cross pol rejection||> 25 dB|
|V/H port isolation||> 20 dB|
|Input power||25 W max per port |
|Connector Type||Type N Female x 2|
|Dimensions||23 x 20 x 25”|
|Mounting method||Carriage bolts|
|Mounting pole dia||1¼” – 4”|
|Surface Finish||Matt powder coat|
|Temperature range||-40° to +60° C / +140° F|
|Wind speed||160 km/h / 100 mph|
|UV protection||UV resistant powder coat|
|Ingress protection||IP54 rain resistant|
3 GHz 22.5dBi Dual Pol Feed Horn Antenna - 4 Pack KPPA-22.5-3GHZDPFHA-4-PACK
3GHz Dual Pol Boomerang Feed Horn Antenna. Whether you need this antennas for +- 45 degree slant or dual Horz. / Vert. this antenna can do both. By turning the feed horn 45 degrees either way the exact same antenna can be adjusted for both polarities.
- Powder coated to prevent salt and sun fade
- Sleek design, allowing these to be installed on clients homes for a higher gain
- Low wind loading for mounting on towers for point to point shots
- This dish can also utilize a Canopy Claw mount, Nanostation and Loco radio mounts.
3 GHz KPPA 22.5-3GHZ DPFHA Boomerang feed-horn antennas. This antenna is used with our standard Cambium 23 inch elliptical reflector dish and delivers 22.5 dBi signal gain. A very cost effective solution for any point-to-point or multipoint application. The feed-horn antenna mounting bracket shown is 100% adjustable allowing you to adjust the polarity on this same dish from V/H or to a Â± 45 degree slant by adjusting the can antenna. Since this is based is the same reflector platform as our Cambium and UBNT dishes itâ€™s very easy to upgrade since you only need to change the radio bracket out for the feed horns and bracket. These feed horns are used with several radios such as the Cambium 320, Ubiquiti, MikroTik and any other dual connectorized radios.