• Home
  • Laird Technologies PoE Input 90-264VAC, Out 48VDC at 0.5A

Laird Technologies PoE Input 90-264VAC, Out 48VDC at 0.5A

(0) No Reviews yet
  • SKU: POE-48i
  • Manufacturer: Laird Technologies
  • Datasheet: Download
  • Availability: 6 In Stock
$24.95

Laird Technologies POE-48i

Laird Technologies POE-48i POE Input 90-264VAC, Out 48VDC at 0.5A

The POE-xxi is an advanced power supply / power inserter. The power supply is auto-ranging on the input and has a regulated voltage output. It has overload and short circuit protection in addition to Ethernet surge suppression builtin. The POE-xxi is not a proprietary unit. It will function with any equipment which is compliant with the IEEE 802.3af POE standards. For all “i” models the power is supplied on ethernet pins 4/5 (V+) and 7/8 (V-). For the “iR” models the power is supplied on ethernet pins 4/5 (V-) and 7/8 (V+). The POE-xxi come complete with a standard North American 115VAC power cord. International cords are available upon request. A Current Indicator (-CI) model is available. The LED will be AMBER until >35mA current flows to the end device which will turn the LED to GREEN. This is a good way to remotely monitor the connection between the POE and the end device and indicate that the end device is turned on. To order this model add a “–CI” suffix to the standard part number. Using power over ethernet to power remote devices has several advantages

Including:

  • The power supply can be centrally located where it can be attached to an uninterruptible power supply.
  • The user has the ability to easily power on reset the attached equipment from a remote location.
  • There is no need to run additional power cabling to the device as power can be supplied over the CAT5 ethernet cable.

Applications:

  • Remote routers, access points and bridges
  • Remote networking equipment
  • SOHO equipment
  • IP camera systems
  • 400MHz to 10GHz systems
  • IP phone systems

    Ratings & Reviews

    No reviews available

    Be the first to Write a Review