• Home
  • Mimosa C5c Radio Only, 4.9-6.4GHz Connectorized Client Radio, 2x2 MU-MIMO, RP-SMA

Mimosa C5c Radio Only, 4.9-6.4GHz Connectorized Client Radio, 2x2 MU-MIMO, RP-SMA

(0)No Reviews yet
  • SKU: 100-00018
  • Manufacturer: Mimosa Networks
  • Data Sheet: Download

Product Information

Mimosa Networks 100-00018

C5c Radio Only, 4.9-6.4GHz Connectorized Client Radio, 2x2 MU-MIMO, RP-SMA, 500+ Mbps, 27 dBm, 802.11ac for PTMP and PTP, PoE Not included

No Client Too Far

C5c Point-to-Point Backhaul & Point-to-Multipoint Client Radio

The Mimosa C5c is a flexible connectorized client radio solution for accommodating short and long range PTP and PTMP, as well as custom antenna solutions. Incorporating unique support for Mimosa's SRS technology, the C5c enables the fastest speeds and is the most scalable wireless access solution available today. The C5c is ideal for professionally-installed rural Fixed Wireless and long range applications for point-to-point backhaul links.

Flexible Antenna Options

Connect to virtually any dual polarization antenna to custom engineer longer distance client links. The C5c has dual RP-SMA connectors for easy cabled antenna connectivity. It can be mounted to any pole via hose clamps or easily clipped onto antennas supporting compatible clip-on mounting bracket systems.

PTP Backhaul Links

The C5c provides extreme price/performance for PTP backhaul links in a small form factor. Wide frequency range support allows avoidance of crowded 5 GHz spectrum bands. Where regulations allow, long distances are enabled with high system power and flexible antenna options.

SRS Client

The C5c offers client-side support for Mimosa's proprietary Spectrum Reuse Synchronization (SRS) technology. This ensures each client device precisely receives and transmits under the timing control of the access point and can dynamically request upstream bandwidth.

As opposed to alternative (fixed) timeslot protocols, upstream bandwidth and latencies are allocated on demand which enables significantly higher overall upstream network bandwidth utilization.

Specifications

Specifications 100-00018

Performance
Max ThroughputPTP/PTMP: 700 Mbps IP (866 Mbps PHY)
Wireless ProtocolsWiFi Interop
Mimosa SRS
Modes PTMP Client
PTP Backhaul
Radio
MIMO and Modulation2x2:2 MIMO OFDM up to 256-QAM
Bandwidth*20/40/80 MHz channels tunable to 5 MHz increments for Mimosa SRS; Tunable to standard WiFi channels for WiFi Interop
Frequency RangePTMP: 4900–6400 MHz* PTP: 4900–6400 MHz Restricted by country of operation ‘new’ US/FCC 5600-5650 MHz support
Max Output Power 27 dBm
Sensitivity (MCS0)-87 dBm @ 80 MHz
-90 dBm @ 40 MHz
-93 dBm @ 20 MHz
Power
Max Power Consumption 12.9 W
System Power Method Passive PoE (24-56VDC)
PoE Power SupplyPassive PoE compliant, 48-56 V Power over Ethernet supply (included)
DimensionsDepth: 44.0 mm (1.73”)
Width: 65 mm (2.56”)
Height: 188.4 mm (7.42”) 
Weight 295 gr (10.4 ounces)
Mounting Single pole strap
Connector Type(2) RP-SMA (female)
Environmental
Operating Temperature -40°C to +55°C (-40°F to 131°F)
Operating Humidity 5 to 100% condensing
Outdoor Ingress Protection Rating IP55
Operating Altitude 4,420 m (14,501’) maximum
Shock and Vibration ETS 300-019-2-4 class 4M5
Features
Gigabit Ethernet10/100/1000-BASE-T
Management ServicesMimosa cloud monitoring and management SNMPv2 & Syslog legacy monitoring HTTPS HTML5 based web UI
Smart Spectrum ManagementActive scan monitors/logs ongoing RF interference across channels with no service impact; Dynamic auto-optimization of channel and bandwidth use
SecurityWPA2 PSK & Enterprise 802.1x; Radius provisioning, COA, DM (from A5); 128-bit AES with hardware acceleration
VLANsPer subscriber VLAN; Q-in-Q, triple tagging; Management VLAN
QoS Supports 4 pre-configured QoS levels
Regulatory and Compliance
ApprovalsFCC Part 15.407 and Part 90Y, IC RSS210, CE, ETSI 301 893/302 502
RoHS Compliance Yes
Safety UL/EC/EN/ 60950-1 + CSA-22.2

Reviews

Ratings & Reviews

No reviews available

Be the first to Write a Review