• Home
  • Laird POE-9s-afi 9VDC 1A Active 802.3af POE Splitter

Laird POE-9s-afi 9VDC 1A Active 802.3af POE Splitter

(0)No Reviews yet
  • SKU: POE-9s-afi
US$‎15.00
  • Manufacturer: Laird Technologies
  • Data Sheet: Download

Out of Stock

 Open chat or call us for stock status

Product Information

Laird POE-9s-afi 9VDC 1A Active 802.3af POE Splitter with isolation


POWER-OVER-ETHERNET Power Supply / Inserter


The active Power-Over-Ethernet (POE) splitter from Laird gives "carrier class" performance in a low cost system. With its IEEE 802.3af compatibility and advanced auto-sensing algorithm, it will accept POE power from any IEEE 802.3af router or power supply. The overload and short circuit protection will shut down power immediately when a short circuit is detected without any damage to the POE system. Power (36 to 60 V) is expected on ethernet pins 4/5 (V+) and 7/8 (V-) as per the IEEE 802.3af standard or pins 1,2,3,6 (Cisco Standard).

Using POE to power remote devices has several advantages including:

  • The power supply can be centrally located where it can be attached to an uninterruptible power supply.
  • Power can be supplied over long distances, up to 300 feet.
  • Power can be available wherever network access is available.
  • The user has the ability to easily power-on reset the attached equipment from a remote location.

The active POE splitter from Laird can be used by the original equipment manufacturer to supply power to remote equipment and devices without the expense of building in separate POE functionality into their equipment. These devices are a good fit for the industrial market for sensing and remote video applications.


FEATURES AND BENEFITS:

• IEEE 802.3af POE active splitter

• Choice of 5, 9, 12 or 24 VDC regulated power

• 100 mohm / 1000 VDC isolation

• Advanced auto-sensing intelligent algorithm

• Overload and short circuit protection

• Advanced switching technology – runs cool

• Complies with IEEE 802.3af POE standard

• FCC and CE approved

• Compatible with IEE 802.3af routers including Cisco and Netgear


APPLICATIONS:

• Remote routers, access points and bridges

• Remote networking equipment

• SOHO equipment

• IP camera systems

• VOIP systems

• IP phone systems

• WiMAX

Specifications

  • Compliance: compliance EMS EN61000-4-2,3,4,5,6,8,11, compliance IEEE: 802.3af POE Standard, compliance-EMI EN55022 ( CISPR22) class B
  • Input Voltage: 36 to 60 VDC
  • Operating Humidity: 5% to 90% non-condensing
  • Output Voltage: 9 VDC @ 1 A
  • Size: 3.25 x 3 x 1.5 in (83 x 76 x 38 mm)
  • Weight: 4.6 oz (130 g)

Reviews

Ratings & Reviews

No reviews available

Be the first to Write a Review