• Home
  • Panoptic PE-IPAF4524-PAN

Panoptic PE-IPAF4524-PAN

(0) No Reviews yet
  • SKU: PE-IPAF4524-PAN
  • Manufacturer: Panoptic
  • Data Sheet: Download
  • Availability: 1 In Stock (updated live)
$19.99

Specifications PE-IPAF4524-PAN

Technology

Input Voltage36V to 57V DC (for higher power operation an input voltage of 48V is recommended). Pin assignment comply to IEEE 802.3af mode A or mode B.
Input Current400mA maximum continuous as per IEEE 802.3af
PD DetectionPresents IEEE802.3af PD signature and Class 0 classification to PSE on any one pair
PortsRJ45 shielded connector for PoE Input
Output(±3%) Can be 5V, 7.5V, 9V, 12V, 18V or 24V
Output Current (RMS)Can be 2A, 1.7A, 1.4A, 1A, 0.7A or 0.5A
Output Power12 Watts maximum continuous. 12.94 Watts maximum.. Maximum output power is determined by the input (voltage and current). Current IEEE 802.3af standard permits 12.94 Watts output.
Regulation (typical)± 3%
Ripple< 100mV p-p (at DC Jack)
End to end≈ 85% (at 24W load at 48V input)
PortsRJ45 shielded connector for Data Out. Centre positive barrel 5.5mm x 2.1mm for DC Out
LEDPoE detection and classification

Environmental

Operation0 to 50°C (32 to 122°F)
Storage-20 to 65°C (-4 to 149°F)
Humidity5% to 85% RH
Dimension1.65 in x 1.26 in x 0.94 in (42 x 32 x 24 mm)
Weight1.4 oz (40g)

Panoptic Smart Adapter 48V to 24V PoE

The IPA4524 will convert a standard 48V POE to 24V POE signal. This allows you to use any standard 802.3af compliant POE switch to power any 24V POE device.

The IntraLAN Power Adapter adopts the PoE Standard (803.2af) and provided a series of useful components to:

  • Enhance the networking capabilities
  • Extend the standard ethernet network beyond the 300-foot limits
  • Adopt the standard 803.2af signal to “non-standard” PoE devices and even non-PoE devices

These 803.2af PoE Power Adapters help to transform standard 803.2af PoE network appliances, such as an 8-port PoE switch, into a more powerful tool by allowing these to connect, power and manage a complete range of non-standard devices. This is accomplished by “bridging” from the standard 803.2af format to the format of the “end device.”

Features

Programmable for all kinds of demanding devices.

IntraLAN Power adapters can be programmed to:

  • Change power levels
  • Change the pinout on the PoE design
  • Completely split the power out into a power “pig tail” with any size barrel connector and any voltage!

Ratings & Reviews

No reviews available

Be the first to Write a Review