• Home
  • Positron Access Solutions G.hn (MIMO) to Gigabit Ethernet Bridge AC Wall Adapter included

Positron Access Solutions G.hn (MIMO) to Gigabit Ethernet Bridge AC Wall Adapter included

  • SKU: G1001-M
  • Manufacturer: Positron Access
  • Data Sheet: Download
  • Availability: Open chat or call us for stock statusEmail me when this product is in stock!

Positron Access G1001-M

G.hn (MIMO) to Gigabit Ethernet Bridge AC Wall Adapter included

The Positron Access Solutions G.hn to Ethernet Bridge for twisted pair is a Managed Demarcation Point acting as a Virtual CPE (vCPE) that can be used to connect to a Residential Gateway (RG) that does not have native support for G.hn on its WAN port.

The G1000-M device is used to control how a Residential Gateway (or User CPE) connects to the G.hn Access Network under the control of the Positron GAM. In this role, it makes sure the information transmitted over the G.hn links is protected with strong AES-128 encryption.


  • G.hn Wave-2 to Ethernet Bridge over Twisted Pair
  • Multiple Input Multiple Output (MIMO) mode
  • G.hn port (RJ14 port)
  • Telephone port (via built-in POTS splitter)
  • Two 10/100/1000BaseT RJ45 ports

Ease of Deployment: Support G.hn operation over telephone wiring (G1000-M) or coax cabling (G1000-C)

Point-to-point and Point-to-multipoint support: Supports Point-to-point (twisted pair and coax) with G1000-M

Ease of Operation: Automatic firmware and configuration management via the Positron GAM

Encryption: AES-128 encryption with individual keys for each end-node under the control of the Positron GAM acting as the Master Node

Modulation and Frequency Band: Supports OFDM 200 MHz (Singe Input Single Output - SISO) with support for Neighbor Domain Interface Mitigation (NDIM), Radio Band Notching function allows cohabitation with legacy analog cable TV channels over coax

Bandwidth Management: Up to 1.7 Gbps with Dynamic Bandwidth Allocation to optimize throughput based on nature of traffic flows with TDD Multiplexing for programmable upstream / downstream ratio

Vectoring (Telephone Wiring): Support for VectorBoost cloud-based vectoring for Far-End Crosstalk (FEXT) mitigation and improved performance over telephone wiring

Mitigation of Near-end Crosstalk: Near End Crosstalk (NEXT) mitigation and support for Neighbor Domain Interface Mitigation (NDIM)

PSD: Programmable PSD mask for coexistence with xDSL / radio and Far End Crosstalk (FEXT) mitigation via Cloud-based VectorBoost vectoring

Reliability and Resiliency: State of the art LDPC Forward Error Correction (FEC)

Specifications G1001-M

Dimensions 2.36” Width x 1” Height x 4” Depth / 60 mm W x 27 mm H x 103.4 mm D
Weight G1000-M: 0.37 lbs (170 g)
LED Power, RJ45 ports link/active, G.hn link
Power Source 12 Vdc / 1A power adapter
Power Consumption Less than 3W
Certification CE Mark, FCC Part 15 Class A
Operating Temperature 0ºC to 40ºC
Storage Temperature -25ºC to 80ºC
Operating Humidity 5% to 95% relative, non-condensing
G.hn Standards G.hn Wave-2 Client based on GigaWire Alliance specification and fully compliant with the following ITU-T
standards • G.9960 Amendment 2 - System Architecture and PHY Layer
• G.9961 Data Link Layer
• G.9962 Management
• G.9964 PSD