Primus Cable FB32-4642SC Tool - Fiber OWL 4 BOLT Auto-Wavelength Test Kit, Multimode, Tests 850nm/1300nm, SC Connectors
- SKU: FB32-4642SC
- Manufacturer: OWL
|NIST Traceable Wavelengths||850nm, 1300nm, 1310nm, 1550nm|
|Additional Wavelengths||980nm, 1490nm, 1625nm|
|Optical Power Measurement Range||+5 to -70dBm|
|Battery Life||Up to 100 hours (9V)|
|Data Storage Points||Up to 1000|
|Download Data Points||Reporter Software|
|Power Units Displayed||dBm, dB, μW|
|Modes of Operation||Simple / Certification|
|Optical Fiber Length Measurement Range||Up to 25km|
|Optical Fiber Length Measurement Accuracy||±2.5 meters|
|Battery Capacity Display||Yes|
|Serial Port Diagnostic||Yes|
|Operating Temperature||-10°C to 55°C|
|Storage Temperature||-30°C to 70°C|
|Dimensions (W x H x D)||3.48" x 6.48" x 1.1"|
|Launch Method (multimode)||LED|
|Connector||SC or ST|
|Center Wavelength (850nm)||850 +30nm/-10nm|
|Center Wavelength (1300nm)||1300 ±50nm|
|Spectral Width (FWHM; 850nm)||50nm|
|Spectral Width (FWHM; 1300nm)||180nm|
|Output Power||-20.0 dBm|
|Initial Accuracy||0.1 dB|
|Output Modes||Continuous Wave Modulated|
|Battery Life||Up to 30 hours|
|Battery Type||9V alkaline|
|Battery Capacity Display||Yes|
|Operating Temperature||0°C to 55°C|
|Storage Temperature||0°C to 75°C|
|Dimensions (W x H x D)||2.75" x 4.94" x 1.28|
Multimode Fiber Certification Test Kit with Integrated Fiber Length Testing
Many fiber optic network bids and Requests For Quote (RFQ) are citing cabling standards to specify the set of guidelines (such as fiber length) that the network installer must follow during the network installation. Adherence to such standards is meant to ensure the quality of the installation and guarantee that the network will perform as it was designed.
The process of testing a network installation to ensure its adherence to specified standards is called certification, and often requires hard-copy documentation as proof of adherence to standards.
The Fiber OWL 4 BOLT MM Test Kit contains the tools necessary for certifying fiber optic links against a myriad of popular cabling standards in multimode networks.
The Fiber OWL 4 BOLT optical power meter is multimode and single mode ready, and contains a user-friendly Fiber Link Wizard that performs link budget calculation (including integrated fiber link length testing), and sets a reference value using the characteristics of the link. This reference is the PASS/FAIL threshold and is calculated against the chosen standard. Up to 1000 fiber runs may be stored, then downloaded to a PC for report generation using our OWL Reporter software.
It also includes intelligent automated testing functions, such as automatic dual-wavelength storage and auto-wavelength recognition, which reduce testing time and human error.
The WaveSource MM fiber optic light source is designed for accurate testing and certification of multimode (850nm & 1300nm) networks. Its dual-wavelength outputs are temperature-stabilized for accurate measurements.
The WaveSource MM has a built-in auto-wavelength switching protocol designed to synchronize the wavelength of the Fiber OWL 4 BOLT with the current output wavelength.