• Home
  • Primus Cable Fujikura 70S Fusion Splicer

Primus Cable Fujikura 70S Fusion Splicer

(0)No Reviews yet
US$‎14,999.99
  • SKU: FB33-5731
  • Manufacturer: Primus Cable

Out of Stock

Direct Ship Item

Product Information

Fujikura 70S Fusion Splicer

The Fujikura 70S is the world’s fastest and most robust core alignment fusion splicer. Incorporating the proven ruggedized features pioneered by Fujikura, the 70S has added automated and enhanced user control features to increase splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion. Fully programmable "auto open sheath clamps" open one sheath clamp, after the tensile test, to prepare the fiber for removal. A new automated "clamshell design" tube heater applies heat to both sides of the splice protection sleeve resulting in a 14-second shrink time. The result is a total splice process time of approximately 21 seconds!Ruggedness and durability are greatly enhance by a mirror-less optical system and "severe-impact resistant" monitor. Battery capacity is now 200 splices/shrinks. An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before.

Specifications

Specifications FB33-5731

Applicable FibersSingle-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655)
Cladding Diameter125 μm
Coating Diameter100 μm to 1,000 μm
Fiber Cleave Length5 to 16 mm
Typical Average Splice Loss0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T standards
Splicing TimeSM FAST mode — 7 seconds; SM AUTO mode — 12 seconds; AUTO mode — 15 seconds with SM fiber
Arc Calibration MethodAutomatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available
Splicing Modes100 preset and user programmable modes
Splice Loss EstimateBased upon dual camera core axis alignment data
Storage of Splice ResultLast 2,000 results to be stored in the internal memory
Fiber DisplayX or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
Magnification320X for single X or Y view, or 200X for X and Y view
Viewing MethodDual cameras with 4.7 inch TFT color LCD monitor
Operating Condition0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C respectively
Mechanical Proof Test1.96 to 2.25N
Tube HeaterBuilt-in tube heater with 30 heating modes; auto-start function
Tube Heating TimeTypical 14 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves
Protection Sleeve Length60 mm, 40 mm, micro
Splice/Heat Cycles with BatteryTypical 200 cycles with power save functions activated
Electrode Life3,000 Arc Discharges
Power SupplyAuto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-18, 14.8 V DC with BTR-09 battery
TerminalsUSB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03
Wind ProtectionMaximum wind velocity of 15 m/s. (34 mph)
Dimensions146 W x 159 D x 150 H (mm) / 5.75 W x 6.25 D x 5.9 H (inches)
Weight2.5 kg (5.5 lbs) with AC adapter ADC-18; 2.7 kg (5.95 lbs) with BTR-09 battery

Reviews

Ratings & Reviews

No reviews available

Be the first to Write a Review