Rohn 9ft (1.66 inch Outside Diameter) Tower Top Cap Section
ROHN 45AG1 9 Foot (1.66 inch Outside Diameter) Tower Top Cap Section
The Rohn 45AG1 Tower Top Cap Section Consists of 14 gauge walls with 4 bays of bracing and insert, double-bolted connections. The Pinnacle of this Section is Capped with a 1-1/4 inch STD Pipe (1.66 inches O.D.) threaded as 1-1/4 inch N.P.T., protruding 12.00 inches above apex of side rails.
This Rohn section is one of several Sections that can be used to top off the 45G tower. The 45AG1 is available in the standard 9 foot 0 inch section length. This tower uses double bolted joints which are proven to be the best method of joining tower sections for sturdiness and dependability.
Featuring a 16-3/4" equilateral triangular design, the 45AG is constructed of extra heavy duty 1-1/4" steel tubing side rails with continuous solid steel rod bracing. Each 9' section is shipped containing all required nuts and bolts attached to one leg. The 45G tower can be used guyed, self-supporting or bracketed configurations according to specifications in the ROHN catalog. As a guyed structure, it can rise to a maximum of 300 feet
- Hot Dip Galvanized
- Double Bolted Joints
- Zig-Zag Rod Bracing
- 1-1/4" Steel Tubing
- Side Rails
- 16 3/4" Equalateral
- Triangular Design
- Can be used in: Guyed Self Supporting Bracketed Config.s