TP-Link AC1200 Omada Wireless Wall-Plate Access Point
|Interface||1 x 10/100Mbps Ethernet uplink port accepts 802.3af/at power supply as PoE power device (PD) 1 x 10/100Mbps Ethernet Port 1 x 10/100Mbps with PoE pass-thru (requires 802.3at PoE+ power supply on PD port.)|
|Power Supply||802.3af/802.3at PoE|
|Power Consumption||9 watts or 25.5 watts including PoE Out|
|Dimensions||5.6 x 3.4 x 0.8 in. (143 x 86 x 19.7mm)|
|Antenna||2 Dual-Band Antennas 2.4GHz: 2 x 3dBi 5GHz: 2 x 4dBi|
|Mounting||Wall Plate Mounting|
|Wireless Standards||IEEE 802.11n/g/b/ac|
|Frequency||2.4GHz and 5GHz|
|Wireless Functions||16 SSIDs（Up to 8 SSIDs on each band） Enable/Disable Wireless Radio Automatic Channel Assignment Transmit Power Control (Adjust Transmit Power on dBm) QoS(WMM) Load Balance Rate Limit Reboot Schedule Wireless Schedule Wireless Statistics based on SSID/AP/Client|
|Wireless Security||Captive Portal Authentication Access Control Wireless Mac Address Filtering Wireless Isolation Between Clients SSID to VLAN Mapping Local LAN port based VLAN Rogue AP Detection 802.1X Support 64/128/152-bit WEP / WPA / WPA2-Enterprise, WPA-PSK / WPA2-PSK|
|Omada Cloud Access||Yes|
|Omada Cloud Controller||Yes|
|Omada Controller Software||Yes|
|LED ON/OFF Control||Yes|
|Management MAC Access Control||Yes|
|System Logging Local/Remote Syslog||Local/Remote Syslog|
|System Requirements||EAP discover utility: Microsoft Windows or MAC OS EAP software controller: Microsoft Windows or Linux (64bit)|
|Environment||Operating Temperature: 0℃~40℃ (32℉~104℉) |
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
AC1200 Omada Wireless Wall-Plate Access Point
Complete In Room Wi-Fi Coverage
An EAP in each room guarantees a strong wireless signal and allows guests to enjoy their own private Wi-Fi network.
Effortless Deployment and Scalability
With 802.3af/802.3at Power over Ethernet supported there’s no need to install additional wiring in the building. Simply plug in existing Ethernet cables and you’re ready to go.
Installation Made Easy
Upgrade Ethernet wall jacks to high-performance Wi-Fi access points. The EAPs can be fitted to existing EU or US wall junction boxes, making installation quick and non-disruptive.
Three Ethernet Jacks, One PoE Outlet
More than just a wireless access point, EAP225-Wall acts as a switch and provides three standard Ethernet jacks together with a Power over Ethernet outlet, capable of powering wired devices such as IP phones, IP cameras, intercoms and more.
Blends Into Your Wall
The EAP225-Wall wireless access point blends into any business setting with a refined, minimalist appearance.
Gigabit Wi-Fi Speeds with MU-MIMO Technology
EAP225-Wall delivers combined dual-band speeds of up to 1200Mbps. Armed with the latest 802.11ac Wave 2 MU-MIMO technology, it can exchange data with multiple clients at the same time to allow more devices to connect without any slowdown to the network.
- AC1200 wireless with 100Mbps Ethernet backhaul
- Designed for office cubical and hotel room wired and wireless connections
- Easy-mount construction allows installation into 1-gang electric wall-box
- Compact, low-profile design fits discreetly with any existing interior style
- Free cloud management and Omada App supported for ultra convenience and easy management
- Power over Ethernet (802.3af/802.3at) support makes deployment effortless and flexible
- Enterprise-class Wi-Fi security helps to decrease network security threats
- Supports management VLAN for an enhanced network management