• Home
  • Tycon Power 48V 240W DIN Rail Industrial Power Supply

Tycon Power 48V 240W DIN Rail Industrial Power Supply

(0)No Reviews yet
  • SKU: PSDIN-48-240W

Out of Stock

Product Information

Tycon Power PSDIN-48-240W

48V 240W DIN Rail Industrial Power Supply

The PSDIN Series of Industrial DIN Rail mount high efficiency switching power supplies operate over a wide temperature range of -40C to +70C. This is the 240W. The input is 90 to 264VAC auto-ranging with wire terminal connections. The output is 48VDC nominal with an adjustment range from 47VDC to 56VDC. There is a switch for single or parallel operation. Two 240W supplies operating in parallel will provide 480W total power. There is an alarm output to provide a dry contact closure to trigger an alarm if the DC output fails, like during a grid power failure. The relay is closed when DC output is normal and open when DC output is in fault condition due to overload or safety shutdown.


Features:

  • High Power and rugged design
  • Short Circuit, Over-Voltage, Over-current Protection
  • 90-264VAC Auto Ranging Input
  • 47~56VDC Adjustable Output
  • -40C to +70C Operating Temperature
  • Supports Parallel Operation
  • Dry Contact DC Alarm

Applications:

  • Powering PoE Switches
  • IP Phone and Security Camera Systems
  • Telecommunications

Specifications

Specifications PSDIN-48-240W

Input Operating Range90-264VAC ; 47-63Hz
Input In-rush Current35A Max
Input Current4.4A @ 115VAC ; 2.20A @ 230VAC
Output Voltage47~ 56VDC (adjustable)
Cont. Load Current5A
Maximum Output Power240W
Peak Power (10sec @ 220VAC)360W
Line Regulation+/- 0.5%
Load Regulation+/- 1%
Voltage Overshoot<5%
Ripple / Noise100mV Peak
Efficiency90% Minimum
Dielectric Strength1500V rms , 1 min, 10mA Max
Insulation Resistance10M Ohms
ProtectionShort Circuit, Over-Voltage, Over-Current, Over Power
Alarm Output (“DC” and “OK”)1A @ 30VDC, 0.5A @ 125VAC. DC OK = Closed, DC Fault = Open
Safety StandardsGB4943 / EN60950-1
EMI StandardsFCC PART 15 CLASS B, EN55022, EN55024
Harmonic CurrentEN61000-3-2 Class D
EMSEN61000-4-x Level 3&4
Operating Temp-40°C to 70°C (-40°F to 158°F)
Operating Humidity5% to 95% non- condensing
Storage Temp-40°C to 85°C (-40°F to 185°F)
MTBF200,000 hrs
Altitude2000m (6562ft)
Vibration10-500Hz 2G 10min Sweep, 20G Surge 11ms
Case Size135 x 121 x 45mm (5.3 x 4.8 x 1.8”)
Weight0.77 Kg (1.7 Lb)
Warranty3 Years

Reviews

Ratings & Reviews

No reviews available

Be the first to Write a Review