Tycon Power Gigabit 36-72VDC IN 802.3af 48VDC OUT 16.8W DC to DC Converter
Product Information
Tycon Power TP-DCDC-4848GD
Gigabit 36-72VDC IN 802.3af 48VDC OUT 16.8W DC to DC Converter and 802.3af POE inserter
The TP-DCDC-4848GD Gigabit Series of DC to DC converters offered by Tycon Power Systems are a low cost and high efficiency solution for those requiring IEEE802.3af Power over Ethernet from a +48VDC or -48VDC voltage source like a battery system or telecom power source. They have an integrated Gigabit POE injector to apply the power and data output to the CAT5 Ethernet cable. The output voltage is regulated and protected. They have two isolated inputs for connecting 2 power sources, like a primary and backup power source. A metal enclosure model is available for industrial applications.
They accept gigabit data-in to a shielded RJ45 Jack and provide gigabit data-out and PoE power on the shielded RJ45 output jack. They work by supplying power on the unused Ethernet pins 4,5(V+) and 7,8(V-). They have various protections for surge, short circuit and overload. The units have power outputs up to 17W.
Features:
- Input Voltage +/- 36-72VDC; Output 48VDC
- Integrated POE Inserter
- High Power 17W
- Short Circuit, Over Current and Over Voltage Protection
- High Temperature Operation
- Dimensions: 85 x 76 x 36mm (3.4 x 3 x 1.4in)
- Weight: 134g (4.7oz)
Applications:
- 48V Battery Systems, Telecom Applications
- Wireless Access Points and Client Devices
- IP Phone and Security Camera Systems
Specifications
Specifications TP-DCDC-4848GD
DC Input | Voltage +/- 36 to 72VDC |
DC Input Connector | Removeable Screw Type Compression Wire Terminal (12 AWG Max) |
DC Output Voltage | 48V (802.3af) |
Data in & Data/POE Output Connector | RJ45 (Shielded) |
Output Current (max) | 0.35A |
Output Power (max) | 17W |
Isolation | PRI to SEC 1500VDC, SEC to GND 500VDC |
Self Consumption Power | <1W |
Efficiency (min) | 75% |
Line Regulation | 1% |
Load Regulation | 5% |
Ripple | 1% |
Noise | 1% |
EMC Standards | FCC Class B EN55022 Class B |
Safety Standards | UL1950, CSA 22.2 &TUV EN60950 |
Operating Temp | -30 to +60°C (-22 to +140°F) |
Operating Humidity | 5% - 90% |
Storage Temp | -40 to +80°C (-40 to +176°F) |
MTBF (Mean Time Between Failure) | 111,863 Hours |
Dimensions (LxWxH) | 85 x 76 x 36mm (3.4 x 3 x 1.4”) |
Weight | 134g (4.7oz) |
Warranty | 3 Years |