• Home
  • Tycon Power 4 Port PoE Gigabit Midspan UniVolt Injector

Tycon Power 4 Port PoE Gigabit Midspan UniVolt Injector

(0)No Reviews yet
US$‎242.20 US$‎254.95
  • SKU: TP-MS4G-VHP
  • Manufacturer: Tycon Systems
  • User Guide: Download
  • Spec Sheet:Download

Out of Stock

71 in stock
Utah
71 In stock

Product Information

Tycon Power TP-MS4G-VHP

4 Port PoE Gigabit Midspan UniVolt Injector

The TP-MS4G-VHP mid span PoE power sources are used for supplying PoE and data to multiple devices from a central location such as an operations room or equipment cabinet. The PoE devices feature a separate data-in port coupled with a data out/PoE port. The PoE function is considered 4 Pair Passive PoE which is sometimes referred to as “High PoE”. The units support Gigabit Ethernet and are backward compatible to 10/100MB.

The Midspan features Universal Voltage (UniVolt™) PoE outputs where the PoE voltage equals the input voltage. All ports will have the same PoE voltage.

PoE DC Voltage (20V-60V) is supplied on pins 1,2 (V-), 3,6 (V+) and 4,5 (V+) and 7,8 (V-). The unit can accept + or – voltage on input however the design is a non-isolated design. Maximum power output per port is 1.8A. The individual outputs are overcurrent, over/under voltage and short circuit protected.

The midspan is DIN Rail mountable with the included DIN Rail brackets.

Specifications

Specifications TP-MS4G-VHP

Ethernet StandardIEEE802.3/IEEE802.3u/IEEE802.3ab (10 base-T/100base-T/1000base-T) 
POE StandardPassive PoE, 4 Pair Power, High PoE
PoE Pinout1,2 (V-) 3,6 (V+) and 4,5 (V+) 7,8 (V-)
Shielded RJ45 Ports4 data-in ; 4 data/PoE out, Port shield is connected to FG (frame ground)
Max Device Distance100m (328ft)
Maximum PoE PowerUp to 1.8A Per Port
POE Protection Over Current, Over/Under Voltage, Short Circuit
LED’sGreen - A valid power device is detected on this port. Active current is >100mA. Red - No power device is detected on this port. Off - No input power, or input source in alarm condition. Alarm: voltage is more than 65VDC, or less than 15VDC. Alarm: current is >2A. 
DC Power Input20VDC to 60VDC, Unit can accept + or – VDC on input, non-isolated design, Fused at 10A 
Self Consumption<1W
Operating Temperature -30C to +60C (-40F to 140F) 
Operating Humidity (RH) Up to 90% , Non Condensing
Storage Temperature-40C to +85C (-40F to 185F) 
Dimensions (LxWxH)90mm x 118mm x 40mm (3.5” x 4.6” x 1.5”)
Weight0.45kg (1lb) 

Reviews

Ratings & Reviews

No reviews available

Be the first to Write a Review