Tycon Power 110/220VAC IN 56V DC POE OUT, 50W POE Injector with Dual 802.3at POE outputs
|Input Voltage||90-264VAC 47-63hz|
|Input Connector||IEC C13 (incl. Power Cord)|
|Output Voltage||(+/-2.5%) 56VDC|
|Data in & Data/POE Output Connector||RJ45 (Shielded)|
|Output Current (max)||0.45A X 2|
|Output Power (total)||50W|
|Line Regulation, Ripple, Noise||1%|
|Surge Protection||IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact), IEC61000-4-4 (EFT) 40A (5/50ns), IEC61000-4-5 (Lightning) 20A (8/20μs)|
|EMC Standards||FCC Class A EN55022 Class A|
|Safety Standards||UL1950, CSA 22.2 &TUV EN60950|
|Operating Temperature||-25 to +50°C (-13 to 122°F)|
|Operating Humidity (RH)||5% - 90%|
|Storage Temperature||-40 to +80°C (-40 to +176°F)|
Tycon Power TP-POE-HP-48Dx2
Tycon Power TP-POE-HP-48Dx2 Power Over Ethernet Injector
110/220VAC IN 56V DC POE OUT, 50W POE Injector with Dual 802.3at POE outputs
The TP-POE-HP-48Dx2 is a unique high power POE injector with Dual 802.3af/at compatible outputs. This means that two devices can be powered from a single POE injector. The data path between the units is handled by the injector so no POE switch is required.
There are models that will run on 12VDC or 24VDC as well as 110/220VAC grid power. The different models have different total outputs up to 70W.
They have two inputs for connecting 2 power sources, like a primary and backup power source. They have various protections for short circuit, overload and surges caused by ESD or lightning. The built-in surge protection protects sensitive connected devices from damage due to surges on data and POE lines. All 8 wires are protected.
The input voltage and output voltage are isolated to avoid any grounding or negative voltage issues