• Home
  • Tycon Power Solar MPPT Battery Charging Controller, Auto Voltage, 12/24V Battery

Tycon Power Solar MPPT Battery Charging Controller, Auto Voltage, 12/24V Battery

$‎123.45 $‎129.95
$‎123.45 $‎129.95

Specifications TP-SC24-20-MPPT

Rated Battery Voltage12/24 (Auto-Detect), 35V Max
Rated Solar Current 20A Max
Max Solar Panel Size 12V Battery = 260W 24V Battery = 520W
Rated Load Current 20A Max
Maximum Capacitive Load 10,000uF
Max Solar Input Voltage 110V (25C) ; 90V (-25C)
Max Power Point Range +2VDC to 75VDC Battery Volts
Conversion Efficiency 96% Typ
MPPT Tracking Efficiency >99%
Communication Port RS232 (for TP-SC-BT1 only)
Self-Consumption < 1W
Temperature Compensation -3.0mV/℃/Cell
Max Wire Size 10 AWG
Voltage and Current Accuracy +/-2%
Environmental Protection IP32
Certifications CE, RoHS
Operating Temp -35°C to 55°C (-31°F to 131°F)
Dimensions 210x151x59.5mm (8.3x5.9x2.3”)
Weight 1.4Kg (3lb )
Warranty 3 years

Tycon Power TP-SC24-20-MPPT

Solar MPPT Battery Charging Controller , Auto Voltage, 12/24V Battery, 20A Solar and Load

The Tycon Solar™ TP-SC24-20-MPPT solar controllers are MPPT (Maximum Power Point Tracking) temperature compensated battery charging controllers. The battery temperature probe cable is included. The controllers are auto-ranging to accommodate 12V and 24V battery systems. They are designed to charge Flooded, AGM, GEL or Lithium batteries. They also have a USER setting for customizable battery charge settings. They have an integral LCD display that shows Battery Voltage, Battery Capacity, Charging Capacity, Battery Temperature, Load Current and Solar Current.

There is an RS232 interface to connect to the Tycon #TP-SC-BT1 Bluetooth adapter (not included). Using this configuration and the available Android or IOS mobile app, the solar controller can be monitored and controlled from a distance.

They have multiple load operating modes which can be set through the buttons on the controller.

The load output has a soft start feature so it can smoothly and reliably power up high capacitance loads up to 20A. There is a convenient On/Off button to disconnect load power when the unit is operated in the default mode (15).They have full electronic protections for short circuit, reverse current, over-power, over-voltage, over-charge, over-discharge and over-temperature. The built-in over-discharge protection and low self consumption ensures the battery is not over-discharged, which greatly increases the life of the batteries. All protections are auto-recovery.

The units are protected against lightning strikes with TVS diode protection. They operate over a wide industrial temperature range. Electronics are conformal coated for environmental protection.

An automatic battery equalization charge automatically engages once every 30days (Programmable). The equalization charge helps to balance the batteries in an array and reduce the possibility of battery sulfation.

Connections are via 6 screw terminals for wire size up to 10AWG. The controllers are internally fused for protection, but we recommend always using an external 20A fuse between the controller and the battery. There are four screw holes for wall mounting. In addition, there are two DIN Rail brackets for DIN Rail mounting included.


  • MPPT Temperature Compensated Charging
  • Fully Automatic Operation
  • LCD Displays: Battery Volts, Battery Temp, Battery Level, Load
  • Current and Solar Current
  • Auto-ranging 12V or 24V Battery Arrays
  • Multimode Load Operation – 5 selectable modes
  • Soft Start Load Output to Power High Capacitive Loads
  • Automatic 30day Battery Equalization
  • Conformal Coated Electronics for Environmental Protection
  • TVS lightning protection, Industrial Temperature Range
  • Low self consumption <1W