Tycon Power 5 Port 10/100Mb Passive PoE Switch
Tycon Power TP-SSW5-NC
5 Port 10/100Mb Passive PoE Switch
The SW5 Series Power over Ethernet (PoE) switches offered by Tycon Power® are fully automatic high speed 5 port Ethernet switches with up to 2A of PoE power per port.
TP-SSW5-NC: Universal Voltage 10/100 PoE Switch. Switch accepts universal voltage (12-57VDC) via the wire terminal connector on the back of the Switch. This model is very compact at only 4”x5”x1.5”. 2A per port.
On the universal voltage models (“-NC”) the PoE output voltage = the input voltage so it is universal in its application. The Ethernet spec supports distances up to 100m (328 feet) between the PoE switch and the remote device.
Tycon Power® sells a variety of power supplies in 60W, 120W and 180W sizes. 18VDC, 24VDC and 48VDC are available. All the Switches have DIN Rail mounts included for convenient DIN rail mounting.
- High Power 10/100 and 1000Mb (“G”) PoE Switch
- Remotely Power Equipment thru CAT5 Cable up to 100m
- Up to 2A per Port
- Built-in Surge Protection
- Automatic MDI/MDI-X Crossover
- Automatic Speed and Duplex Sensing
- Compact Size
- High Temperature Operation
- CE and FCC Certification
- I.T.E. Power Supply, UL Listed
- Wireless Access Points and Client Devices
- IP Phone and Security Camera Systems
|Ports||1 data/PoE input and 4 data/PoE, automatic crossover and polarity|
|Transmission Speed||100 Mbps /10 Mbps Auto-negotiation|
|Switch Technology||Store and Forward|
|Flow Control||IEEE802.3x(full-duplex), Back Pressure(half-duplex)|
|Address Table||1K MAC, self-learning|
|Maximum POE Power||2A per port|
|Self Consumption||< 1 Watt|
|Operating Humidity (RH)||5% - 90% (non condensing)|