• Home
  • Tycon Power 3 Port 60W Gigabit Poe Switch/Extender IEEE802.3af/at

Tycon Power 3 Port 60W Gigabit Poe Switch/Extender IEEE802.3af/at

$‎94.95 $‎99.95
  • SKU: TP-SW3G
  • Manufacturer: Tycon Systems
  • Data Sheet: Download
  • Availability: Open chat or call usEmail me when this product is in stock!
$‎94.95 $‎99.95

Specifications TP-SW3G

Ports 1 data/PoE input and 2 data/PoE outputs, automatic crossover and polarity
Transmission Speed 1000 Mbps (Gigabit) / 100 Mbps /10 Mbps Auto-negotiation
Connections Shielded RJ45, Grounded to case
PoE Input Port Vin 44VDC to 57VDC, PoE Pinout: 1,2(V-); 3,6(V+) and/or 7,8(V-); 4,5(V+)
PoE Output Ports Vout 42VDC to 55VDC, Pin assignment: V-(1,2), V+(3,6)
PoE Output Power 30W per port Maximum, 60W Total
POE Compatibility IEEE802.3af (PoE), IEEE802.3at (PoE+), 802.3at 4 Pairs (60W) High PoE
POE Protections Over Temperature, Over Current, Short Circuit
Surge Protection IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC61000-4-4 (EFT) 40A (5/50ns)
Self Consumption< 1.5 Watt Typical
LED’s Link (Green On), Activity (Green Blinking ), PoE Detect (Yellow On)
Switch Technology Store and Forward
Protocol CSMA/CD
Flow Control IEEE802.3x(full-duplex), Back Pressure(half-duplex)
Data Transmission Rate 148800pps ,14880pps
Address Table 1K MAC, self-learning
Operating Temp -30 to +60°C (-22 to 140°F)
Operating Humidity (RH) 5% - 90% (non condensing)
Storage Temperature -40 to +85°C (-40 to +185°F)
Dimensions (LxWxH) 119 x 85 x 28mm (4.7 x 3.3 x 1.1”)
Weight 280g (9.9oz)
Warranty 3 Years

Tycon Power TP-SW3G

3 Port 60W Gigabit Poe Switch/Extender IEEE802.3af/at

The TP-SW3G Power Over Ethernet (PoE) 3 Port Gigabit switches offered by Tycon Systems are fully automatic high speed Ethernet switches with up to 30W of PoE power per port.

The unit accepts Gigabit data and power via PoE into the RJ45 “PoE In” port. The PoE In port is compatible with IEEE802.3af, IEEE802.3at and IEEE802.3at 4 pair (60W). It can also accept 42-57VDC Passive PoE.

There are two fully compliant 802.3af/at Gigabit “PoE Out” ports. These ports are capable of up to 30W per port and 100m (330ft) distance.

Multiple TP-SW3G can be strung together to provide effective distances up to about 300m depending on loads. No extra power is required as the units are powered over PoE.

The units are compatible with Category 5 or higher Ethernet cables. The RJ45 connectors are shielded and grounded to the case. The units have 15kV surge protection on all Ethernet wires and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial applications.