Tycon Power 12-56V 5 port Multi-Volt Gigabit Passive PoE Switch
$151.95 $159.95
Product Information
- Specifications
- Description
Specifications TP-SW5G-MULTI
| Ethernet Standard | IEEE802.3/IEEE802.3u |
| Ports | 1 data/PoE input and 4 data/PoE, automatic crossover and polarity |
| Transmission Speed | 1000Mbps / 100 Mbps /10 Mbps Auto-negotiation |
| Switch Technology | Store and Forward |
| Protocol | CSMA/CD |
| Flow Control | IEEE802.3x(full-duplex), Back Pressure(half-duplex) |
| Data Transmission Rate | 1488000pps for 1000baseT, 148800pps for 100baseT, 14880pps for 10baseT |
| Address Table | 1K MAC, self-learning |
| Connections | Shielded RJ45 |
| POE Output Ports | Port 1-4, auto power management Pin assignment: TX(1,2), RX(3,6), V+(4,5), V-(7,8) |
| Maximum POE Power | 35W per port |
| POE Auto Detection | IEEE 802.3af, 802.3at |
| POE Protection | Over Temperature, Over Current, Over/Under Voltage |
| Data Surge Protection | IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC61000-4-4 (EFT) 40A (5/50ns) IEC61000-4-5 (Lightning) 20A (8/20μs) |
| LED’s | Link (Green On) Activity (Green Blinking ) PoE Detect (Yellow On) PoE Detect Error (Yellow Blinking) Power On (Green On) Power On Alarm (Red On) |
| DC Power Input | 48VDC (42V to 60V), Dual DC Inputs, Reverse Polarity Protected. Also Accepts PoE power input on Port 5 |
| Self Consumption | < 3 Watts |
| Operating Temp | -20 to +75°C (-4 to 167°F) |
| Operating Humidity (RH) | 5% - 90% (non condensing) |
| Storage Temperature | -55 to +85°C (-67 to +185°F) |
| Dimensions (LxWxH) | 159 x 118 x 40mm (6.3 x 4.6 x 1.6”) (HP version has metal housing) |
| Weight | 318g (11oz) |
| Warranty | 3 Years |
Tycon Power TP-SW5G-MULTI
12-56V 5 Port Multi-Volt Gigabit Passive PoE Switch
TP-SW5G-MULTI: Universal Multi Voltage 10/100/1000MB PoE Switch. Switch accepts up to 4 different voltages (12-57VDC) so user can power both 48V PoE and 24V PoE devices from the same switch. The port can individually be set to Data Only by disconnecting the voltage input to that specific port. 1A per port.
The unit supplies PoE power to the remote device on Ethernet pins 4,5(V+) and 7,8(V-). The Ethernet spec supports distances up to 100m (328 feet) between the PoE switch and the remote device.
The switch accepts DC power from any power supply. The PoE output voltage equals the DC voltage of the power supply used from 12V to 57VDC. The switch also includes an unpowered uplink port.