• Home
  • Tycon Power 8 Port 10/100Mb Univolt PoE Switch

Tycon Power 8 Port 10/100Mb Univolt PoE Switch

US$‎180.45 US$‎189.95
  • SKU: TP-SW8-NC
  • Manufacturer: Tycon Systems
  • Data Sheet: Download
  • User Guide: Download
  • Availability: Direct Ship Item Ships direct from manufacturer usually same day Email me when this product is in stock!
    Out of stock at College Station
US$‎180.45 US$‎189.95

Specifications TP-SW8-NC

Ethernet Standard IEEE802.3/IEEE802.3u (10 base-T/100base-T)
POE Standard (Port 1-8) TP-SW8-NC Passive POE 12-57VDC
Ports 1 data/PoE input and 7 data/PoE output automatic crossover and polarity
Transmission Speed 100 Mbps(100base-T),10 Mbps(10base-T) Auto-negotiation
Switch Technology Store and Forward
Protocol CSMA/CD
Flow Control IEEE802.3x(full-duplex), Back Pressure(half-duplex)
Data Transmission Rate 148800pps for 100base-T, 14880pps for 10base-T
Address Table 2K MAC, self-learning
Connections Shielded RJ45
POE Port Port 1-7, auto power management Pin assignment: TX(1,2), RX(3,6), V+(4,5), V-(7,8)
Maximum POE Power Port 1-8, 2A Per Port – NC Version Port 1-8, 35W Per Port – 802.3af/at Version Secondary Wire Terminal Input Max 10A
POE Protection Over Temperature, Over Current, Over/Under Voltage
Data Surge Protection IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact) IEC61000-4-4 (EFT) 40A (5/50ns) IEC61000-4-5 (Lightning) 20A (8/20μs)
LED’s Link (Green On, Yellow On) Activity (Green Blinking, Yellow Blinking ) PoE Input Detect-4 pair (Yellow On) PoE Input Detect-2 pair (Yellow Blinking) Power On (Green On) Power On Alarm (Red On)
DC Power Input 46V to 57V, 12V to 57V(-NC Version) Dual DC Inputs, Reverse Polarity Protected.
Self Consumption <1.5 Watts
Operating Temperature -40 to +85°C (-40 to 185°F)
Operating Humidity (RH) 5% - 90% (non condensing)
Storage Temperature -55 to +105°C (-67 to +221°F)
Dimensions (LxWxH) 159 x 116 x 40mm (6.3 x 4.6 x 1.6”)
Weight 0.45kg (1lb)

Tycon Power TP-SW8-NC

High Power Gigabit 8 Port POE Switches

The TP-SW8-D Power over Ethernet 802.3af/at (PoE) 10/100Mb switch offered by Tycon Power is a fully automatic high speed 8 port Ethernet switch.

The -NC version is a passive PoE model for devices which are not 802.3af/at compliant.

On the -NC version the PoE output voltage = the input voltage so it is universal in its application. The DC input power range can be from 12V to 57V. The units can be powered via 2 or 4 pair PoE to port 8 (2A max). TP-SW8- D has a 2 channel 802.3at input for 70W max PoE input. Both models supply power to the remote device on the unused Ethernet pins 4,5(V+) and 7,8(V-). The Ethernet spec supports distances up to 100m (328 feet) between the PoE switch and the remote device.

18V, 24V and 48V 60W, 120W and 180W power supplies are available. There are 2 power inputs for attachment of primary and backup power sources.


  • High Power 10/100Mb 8 Port PoE Switch
  • Remotely Power Equipment thru CAT5 Cable up to 100m
  • Extend Ethernet and PoE up to 200m
  • Up to 2A per Port
  • Built-In Surge Protection
  • Automatic MDI/MDI-X Crossover
  • High Temperature Operation
  • CE and FCC Certification
  • I.T.E. Power Supply, UL Listed


  • Wireless Access Points and Client Devices
  • IP Phone and Security Camera Systems
  • Power multiple devices from 1 data cable