Tycon Power TPDIN PowerSens Remote Monitor and Control Unit, TPDIN2
|Voltage Measurement (DC)||V1, V2, V3, V4 = 1-80VDC|
|Voltage Measurement Accuracy||+/- 0.1V|
|Current Measurement (DC)||I1, I2 = 0.1A to 20A, I3 = +/-10A I4 Supports External Current Shunts – Input Range +/-25mV|
|Current Measurement Accuracy||+/- 0.1A|
|Common Mode Voltage Range||-20V to +80V|
|Temperature Measurement||T1,T2 = -40C to 125C|
|Temperature Measurement Type||T2 = Embedded, T1 = External Sensor (included)|
|Temperature Measurement Accuracy||+/- 1 degC|
|Relays||CH1, CH2 (NC); CH3, CH4 (NO) = 10A 30VDC, 125-250VAC|
|Relay Control||CH1, CH2, CH3, CH4 = Manual or Automatic based on Volts, Amps, Temperature, Ping or Time|
|Power Requirements||10-57VDC Wire Terminal or 802.3af/at Class 0 PoE or 24V Passive PoE 1.5W All Relays Off, 3.5W All Relays On|
|Accessibility||Via Web Browser and SNMP|
|Data-Logger||FIFO, Max 4048 data sets, Programmable log interval|
|Connections||Removable Wire Terminal|
|Wire Size||12AWG Max|
|Operating Temperature||-40C to +75C (-40F to 167F)|
|Humidity (RH)||0% - 90%|
|Dimensions (LxWxH)||125 x 102 x 46mm (4.9” x 4” x 1.8”)|
|Weight||410g (14.5 oz)|
Tycon Power TPDIN-Monitor-WEB2
TPDIN PowerSens Remote Monitor and Control Unit, TPDIN2
The PowerSens™ Web Based Remote Monitor and Control System is a versatile tool which enables the equipment designer and installer to remotely monitor their equipment and site. The unit can be accessed via the network (web and SNMP) to remotely monitor up to 4 voltages, 4 currents, 2 temperatures and control power to various equipment using 4 on-board relays. The system has built-in surge protection to prevent damage from electrical surges.
On board data-logging and graphing capabilities allow the user to see history of the various parameters being measured. The graphical interface allows the user to control relays via a single mouse click and monitor all the measurement parameters real-time via any web browser. The web interface allows access and control via desktops, laptops, tablets and smartphones. The Tycon APP for IOS and Android facilitates remote access.
The system allows control of the relays based on Voltage, Current, Temperature, Time or Ping Watchdog. This provides almost unlimited flexibility.
The relays have a special one-click cycle feature with programmable cycle times which can be used to turn a device off and then back on after the predetermined time with a single button click. This is useful for rebooting a device like a PoE Switch by power cycling it, thereby rebooting all devices attached to the switch. Relay CH1 and CH2 are Normally Closed type, Relay CH3 and CH4 are Normally Open type. Relays don’t use any power when they are in their default position. CH4 has additional functionality built into the user interface to allow for starting a generator.
Two of the current ports provide bi-directional current (+/-), showing direction of current flow. This is useful for monitoring batteries so you can see when the battery is charging and when it is discharging. One of these current ports supports external current shunts so very large currents can be monitored. The User Interface provides for quick calibration of external shunts by entering the shunt resistance.
Connections are via removable wire terminal connectors. This allows for easy troubleshooting and maintenance because the unit can be removed from the system without disturbing the system wiring.
User defined labels for each parameter makes sure that when viewing the web interface or graphs that users can quickly identify the parameter they are concerned about. An internal real time clock based on PC time or Internet time ensures that data logging is accurate. Each Monitor can also have a unique name to identify it on the network. This makes it easy to manage multiple units on a network. Each parameter has programmable +/- offsets to be able to perform field calibration to compensate for things such as line loss or variations in measuring equipment. This provides unsurpassed flexibility as each device can be tailored by customer to their specific needs.
The user interface on this device is customizeable. You are able to change the branding for the Logo, Favicon, Web Address, Menu Colors, and Model Number. You are able to suppress the copyright info, but this cannot be changed.
- Remotely Measure 4 Voltages, 4 Currents, 2 Temperatures
- Remotely Control Equipment with 4 Relays: 2 NC and 2 NO
- Automatic Control of Relays by Volts, Amps, Temp, Ping, Time
- Access via Web or SNMP. Automatically Send Email Alerts
- On-Board Datalogger and History Graphs
- Customizable UI
- Accepts power via PoE (802.3af or Passive) or wire terminal
- DIN Rail Mounting