Tycon Power UPS Pro 12V, 9Ah Batt, 24V POE
Tycon Power UPS-DC1224-9Enclosure Type: Die Cast
Battery Voltage: 12VDC
POE Output Voltage: 24VDC
Battery Capacity: 9Ah
The UPSPro™ series outdoor enclosures are designed for applications that require a backup power source in order to maintain uninterrupted service to customers. The enclosure is powered over a CAT5 network cable via Power Over Ethernet (POE) using a POE Supply/Inserter (included). Features include an advanced battery charge controller to protect against over-charging or over-discharging of the valve regulated sealed lead acid AGM or GEL batteries. Enclosures have multiple ports for CAT5 cable, antenna cables/connectors or other cabling. They are vented to prevent residual buildup of hydrogen gas.
There is a generous amount of space reserved inside the enclosures for customer electronics such as controllers, wireless AP or CPE cards, sensors, inverters, etc. Equipment runs on battery power which isolates it from power line surges which is a main cause of outdoor equipment failure.
Most models are equipped with a Solar Ready controller so they can also be powered using solar panels in addition to or instead of the POE power supply.
Multiple configurations are available for 12V or 24V systems with various battery storage capacities.
A typical 250mW wireless access point with average power consumption of 3.5W will run 26 hours on a 9Ah battery at room temperature or 17 hours at -20 deg C.
- Protects sensitive electronics from damaging power line surges
- Provides 24hour battery backup @ 3.5 W load or 12 hours @7W load per 9Ah battery
- Powered Over CAT5 Ethernet cable
- Several POE voltages available (12V, 18V, 24V and 48VDC)