• Home
  • Tycon Power UPS Pro 12VDC 204Ah GEL Batt 144W 2400VA

Tycon Power UPS Pro 12VDC 204Ah GEL Batt 144W 2400VA

(0) No Reviews yet
$1,429.95

Specifications UPS-ST12-200

Load Voltage12V +/- 0.5V
Maximum Load Output12A (144W)
Minimum Load Output1A
Available Storage Capacities1 battery 51Ah 600VA, 2 battery 102Ah 1200VA, 4 battery 204Ah 2400VA
Battery TypeNon-Spillable Valve Regulated Sealed Lead Acid / GEL
Charge VoltageWET Equalize = 14.6V, Float = 13.2V, GEL Equalize = 14.2V, Float = 13.5V
Maximum Charge Current12A
Over-discharge protection10.7V Load Off, 12.6V Load On
Other ProtectionShort Circuit, Reverse Battery, Over Voltage
VAC Input +/- 10%Selector Switch 120VAC / 240VAC , 50/60Hz
VAC Input Current3.5A @ 115VAC / 1.8A @ 240VAC
Fuse6A internal
Self Consumption<5W
Enclosure TypePowder Coated Steel, Security Locks, Pole (2” to 4”) or Wall Mount
Enclosure External Size24 x 15 x 14" (610 x 381 x 356mm)
Enclosure Internal Size23 x 14 x 12" (584 x 356 x 305mm)

Tycon Power UPS-ST12-200

Enclosure Type: Steel
Battery Voltage: 12VDC
POE Output Voltage: N/A
Battery Capacity: 204Ah

The UPSPro™ ST outdoor UPS systems are designed to provide up to 192W backup power. There is enough backup power to keep a wireless base station alive for many hours. The controller provides load control to make sure the batteries don’t over-discharge. This greatly extends the life of the batteries. The load output is also regulated to be sure that the voltage doesn’t exceed the maximum voltage allowed by the load. The system is powered from 120VAC or 240VAC power. In case of power failure the transition to battery power is seamless and automatic. Recovery is automatic. The controller supports GEL/AGM or wet batteries. Systems are available without batteries to save on international shipping costs.

The weatherproof enclosure with security locks has multiple ports for CAT5 cable, solar and other cabling. It is vented to prevent residual buildup of any hydrogen gas. The included bracket kit allows for the enclosure to be pole mounted or wall mounted. The systems are rated to operate over a wide temperature range of -30C to +60C.

There are multiple system configurations available: 12V 51Ah(600VA), 12V 102Ah(1200VA), 12V 204Ah(2400VA), 24V 51Ah(1200VA), 24V 102Ah(2400VA) and 48V 51Ah(2400VA) Battery.

There is a generous amount of space reserved inside the enclosures for customer electronics such as controllers, wireless AP or CPE cards, sensors, inverters, etc. The standard component layout is designed for ease of maintenance.

Equipment runs on battery power which isolates it from power line surges which is a main cause of outdoor equipment failure.

The system is also compatible with the TPSK Solar panel kits. A TPW wind turbine system can also be used as an alternate power source in addition to solar and AC power.

Ratings & Reviews

No reviews available

Be the first to Write a Review