• Home
  • Tycon Power UPS Pro 12VDC 51Ah GEL Batt, 144W 600VA

Tycon Power UPS Pro 12VDC 51Ah GEL Batt, 144W 600VA

(0) No Reviews yet

Specifications UPS-ST12-50

Load Voltage 12V +/- 0.5V
Maximum Load Output 12A (144W)
Minimum Load Output 1A
Available Storage Capacities 1 battery 51Ah 600VA
2 battery 102Ah 1200VA
4 battery 204Ah 2400VA
Battery Type Non-Spillable Valve Regulated Sealed Lead Acid / GEL
Battery Life (Typical) 5 Years
Charge Voltage WET Equalize = 14.6V, Float = 13.2V
GEL Equalize = 14.2V, Float = 13.5V
Maximum Charge Current 12A
Over-Discharge Protection 10.7V Load Off
12.6V Load On
Other Protection Short Circuit, Reverse Battery, Over Voltage
VAC Input +/- 10% Selector Switch 120VAC / 240VAC , 50/60Hz
VAC Input Current 3.5A @ 115VAC / 1.8A @ 240VAC
Fuse 6A internal
Self Consumption <5W
Enclosure Type Powder Coated Steel, Security Locks, Pole (2” to 4”) or Wall Mount
Enclosure External Size 24 x 15 x 14" (610 x 381 x 356mm)
Enclosure Internal Size 23 x 14 x 12" (584 x 356 x 305mm)
Operating Temperature -30°C to +60°C (-22°F to 140°F)
System Weight (no batteries) 55lb (25kg)
Battery Weight 37lb (17kg) each x 1, 2 or 4

Tycon Power UPS-ST12-50

Enclosure Type: Steel
Battery Voltage: 12VDC
POE Output Voltage: N/A
Battery Capacity: 51Ah

The UPSPro™ ST outdoor UPS systems are designed to provide up to 192W backup power. There is enough backup power to keep a wireless base station alive for many hours. The controller provides load control to make sure the batteries don’t over-discharge. This greatly extends the life of the batteries. The load output is also regulated to be sure that the voltage doesn’t exceed the maximum voltage allowed by the load. The system is powered from 120VAC or 240VAC power. In case of power failure the transition to battery power is seamless and automatic. Recovery is automatic. The controller supports GEL/AGM or wet batteries. Systems are available without batteries to save on international shipping costs.

The weatherproof enclosure with security locks has multiple ports for CAT5 cable, solar and other cabling. It is vented to prevent residual buildup of any hydrogen gas. The included bracket kit allows for the enclosure to be pole mounted or wall mounted. The systems are rated to operate over a wide temperature range of -30C to +60C.

There are multiple system configurations available: 12V 51Ah(600VA), 12V 102Ah(1200VA), 12V 204Ah(2400VA), 24V 51Ah(1200VA), 24V 102Ah(2400VA) and 48V 51Ah(2400VA) Battery.

There is a generous amount of space reserved inside the enclosures for customer electronics such as controllers, wireless AP or CPE cards, sensors, inverters, etc. The standard component layout is designed for ease of maintenance.

Equipment runs on battery power which isolates it from power line surges which is a main cause of outdoor equipment failure.

The system is also compatible with the TPSK Solar panel kits. A TPW wind turbine system can also be used as an alternate power source in addition to solar and AC power.

Ratings & Reviews

No reviews available

Be the first to Write a Review