• Home
  • Tycon Power 12V 50Ah 600W Outdoor UPS Systems

Tycon Power 12V 50Ah 600W Outdoor UPS Systems

$‎788.45 $‎829.95
$‎788.45 $‎829.95

Specifications UPS-ST12-50-600

Battery Voltage (DC)12V
Input Voltage (AC)120/240VAC, 50/60Hz, 5A Max.
Capacities (Amp Hr) @ 12V50Ah (1 battery)
Avail Storage Capacity (Watt Hr)600Wh
Max Output Power600W
Suggested Maximum Load450W
Maximum Instantaneous Load20A 500msec
Battery TypeValve Regulated Sealed Lead Acid / Absorbent Glass Mat (AGM)
Battery Life5 Years
Battery Cable Fuse6 x 32mm Ceramic 30A 250V
Controller Type40A MPPT Solar Controller with Status Display and 20A Load with on/off switch
Maximum Solar Panel Size240W
Controller Display StatusBattery Voltage, Charging Voltage, Charging Current, Load Current, Temperature
Overcharge Protection14.4V
Over-discharge protection11V
Over-discharge recovery voltage12.6V
Controller Self Consumption<1W
Enclosure TypePowder Coated Steel – Pole/Wall Mount
Enclosure External Size24 x 15 x 14" (610 x 381 x 356mm)
Enclosure Internal Size23 x 14 x 12" (584 x 356 x 305mm)
Operating Temperature-30°C to +60°C (-22°F to 140°F)
System Weight (without batteries)55lb (25kg)
Battery Weight (each)37lb (17kg)
CertificationsIndividual components used have CE Certifications. Batteries have CE and UL.

Tycon Power UPS-ST12-50-600

12V 50Ah 600W Outdoor Ups Systems

The UPSPro® 120W series outdoor enclosures are designed for applications that require a backup power source in order to maintain uninterrupted service to customers. The enclosure is powered from 120/240VAC. It is also solar ready so a solar panel can be added as an alternate power source or to extend backup time. Features include an advanced battery charge controller to protect against over-charging or over-discharging of the valve regulated sealed lead acid AGM batteries. Enclosures have multiple ports for CAT5 cable, antenna cables/connectors or other cabling. They are vented to prevent residual buildup of hydrogen gas.

There is some space inside the enclosures for customer electronics such as controllers, wireless AP or CPE cards, sensors, inverters, etc. Equipment runs on battery power which isolates it from power line surges which is a main cause of outdoor equipment failure.

A typical 250mW wireless access point with average power consumption of 4W will run 24 hours on a 9Ah battery at room temperature or 16 hours at -20 deg C.


  • Weatherproof, UV resistant, outdoor enclosures
  • Powered from AC mains power and/or Solar
  • Interior space for customer electronics
  • Wall or Pole Mounting
  • Isolates Customer Equipment from Power Line Surges
  • High-Quality AGM Sealed Lead Acid Batteries
  • Advanced battery charge controller protects against overcharge and over discharge