Tycon Power UPS Pro 24V 104Ah Batt, 24VDC POE
|Battery Capacity||24VDC 102Ah|
|System Power Output||60W Continuous|
|POE Power Supply Input Voltage||100-270VAC 47-63Hz|
|POE Power Supply Output Voltage||48VDC @ 3A|
|Controller Solar Input||8A Max (270W 24VDC Panel)|
|Overcharge Protection||28.6 +/- 0.3V|
|Over-discharge protection||Load Off: 20.0 +/-0.3V Load On: 22.3 +/-0.3V|
|Other Protection||Short Circuit, Reverse Battery|
|POE Switch Output||4 POE Ports, 20 to 24.5VDC @ Max 2A per port, Shielded RJ45|
|POE Switch||10/100Mb IEEE802.3/IEEE802.3u Auto Crossover|
|POE Protection||Over Temperature, Over Current, Short , Over/Under Voltage, Surge|
|System Self Consumption||<1.5W|
|Battery Type||Non Spillable Sealed Lead Acid GEL|
|Battery Life (TYPICAL)||5 Years|
|Enclosure Type||Powder Coated Steel, Security Locks, Pole (2” to 4”) or Wall Mount|
|Enclosure External Size||24 x 15 x 14" (610 x 381 x 356mm)|
|Enclosure Internal Size||23 x 14 x 12" (584 x 356 x 305mm)|
|Operating Temperature||-30°C to +60°C (-22°F to 140°F)|
|System Weight (without batteries)||55lb (25kg)|
|Battery Weight||37lb (17kg) each x 4|
Tycon Power UPS-ST2424-100-UBNT
The UPSPro™ UBNT outdoor UPS system is designed specifically for 24VDC POE equipment like that from Ubiquiti, Mikrotik, Tranzeo, etc. The system provides up to 60W of continuous total DC power on 4 switched power over Ethernet (POE) ports. There is also a data uplink port if an external data connection is desired. The system is powered over Ethernet cable from an included 150W AC to DC power supply with POE inserter.
The system is also Solar Ready™ so an optional solar panel kit (TPSK24) can be added anytime to make a complete standalone remote power system or utilize the solar capacity to extend the backup time. The proprietary charge controller maintains the proper charge on the batteries to prevent over charge and controls the load to prevent over-discharge.
The weatherproof enclosure with security locks has multiple ports for CAT5 cable, solar and other cabling. It is vented to prevent residual buildup of any hydrogen gas. The included bracket kit allows for the enclosure to be pole mounted or wall mounted. The systems are rated to operate over a wide temperature range of -30C to +60C.
There are 3 system configurations available: 51Ah Battery capacity for 20hours backup time, 102Ah battery capacity for 40 hours backup time and also a system without batteries for those customers who want to use their own sealed lead acid type batteries. Battery life on the high performance GEL cells is rated at 5 years. Typical recharge time from a full discharge is 20 hrs for the 51Ah battery and 40 hrs for the 102Ah battery. Recharge times will be faster with optional solar panel kits and depending on size of panel used.
There is a generous amount of space reserved inside the enclosures for customer electronics such as controllers, wireless AP or CPE cards, sensors, inverters, etc. The standard component layout is designed for ease of maintenance.
Equipment runs on battery power to isolate it from power line surges which is a main cause of outdoor equipment failure.