• Home
  • Tycon Systems Industrial Gigabit Switch,4 802.3bt PoE++, 2 2.5G SFP, 48VDC Input, Managed

Tycon Systems Industrial Gigabit Switch,4 802.3bt PoE++, 2 2.5G SFP, 48VDC Input, Managed

(0)No Reviews yet
US$‎360.95 US$‎379.95

Out of Stock

449 in stock
Utah
449 In stock

Product Information

Tycon Systems TP-SW4GBT-2SFP

Industrial Gigabit Switch,4 802.3bt PoE++, 2 2.5G SFP, 48VDC Input, Managed

The TP-SW4GBT-2SFP Power over Ethernet (PoE) 6 port Gigabit switch offered by Tycon is fully automatic high speed Layer 2+ Ethernet manageable switches. The 6 port model has 4 GigE PoE++(90W) and 2 SFP 2.5G ports. The PoE ports are manageable via the user interface. The maximum total power for all ports is an impressive 360W. They utilize industry standard 802.3at/bt detection for fully automatic operation.

The switch features security protocols like SSH and SSL for secure access of the switch command interface. The interface can be accessed via the serial console port or any of the Ethernet ports. The command interface can be controlled via web browser, command line interface(CLI), TELNET, SSH or SNMP.

With L2+ features, the switches provide better manageability, security, QOS features and performance. VLAN, Port Mirroring, Port Isolation, IGMP Snooping, DHCP Snooping, LLDP, ARP Inspection, Storm Control, IP Source Guard, Access Control Lists, PoE++ management are just some of the features available with this Industrial PoE Switch.

Spanning Tree, Jumbo Frames, Cable diagnostics, Ring Topology are also supported.

The switches are compatible with Green Ethernet standards. The switch can automatically power down the port Ethernet drivers when a link is not active. Active mode is resumed without loss of any packets when the switch detects the link is active. The switches also automatically adjust the signal strength depending on cable length to save power.

The switches require a 48VDC to 57VDC input on the dual input wire - terminal connector which is capable of accepting up to 12AWG wire.

The units are compatible with Category 5 or higher Ethernet cables with network distances up to 100m. The optical range for fiber ports is up to 120Km. The RJ45 connectors are shielded and grounded to the case. The units have surge protection on all ports and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial applications.


Features:

  • Industrial Strength -40C - +80C Operating Temp
  • 4 PoE++ (802.3bt 90W) and 2 fiber (SFP) Ports
  • 10/100/1000 Gig Compatible
  • Manageable via Console Port or IP
  • Surge Protected Voltage/Ethernet Inputs
  • Integrated DIN Rail Mount
  • I.T.E. Power Supply, UL Listed

Applications:

  • Outdoor/Factory Network Installs
  • Cameras/Wireless Radios

Specifications

Specifications TP-SW4GBT-2SFP

Ports4 Ports 802.3af/at/bt, PoE++ (90W) 2 SFP/LC 2.5Gigabit Fiber Ports 1 Console Port
Transmission Speed1000 Mbps (Gigabit) / 100 Mbps /10 Mbps Auto-negotiation
Fiber Transceiver Compatibility155M / 1.25G / 2.5G Multi Mode or Single Mode
ConnectionsShielded RJ45, Shielded SFP/LC, Grounded to Case
Power InputVin 48VDC to 57VDC on Dual Input Wire Terminal (Max wire size 12AWG)
Self Consumption< 5 watts typical
LED’sPower:Red ; System:Green ; Ethernet Link:Green Flashing ; PoE:Amber ; Fiber:Green
PoE ProtectionsOver Voltage, Over Current, Short Circuit
PoE Pinout802.3af/at Ports = 1/2 V- ; 3/6 V+ 802.3bt Ports = 1/2,7/8 V- ; 3/6,4/5 V+
Surge Protection6KV Normal Mode, 2KV Differential Mode
ESD Protection15KV Air, 8KV Touch
Management MethodsWEB, CLI, TELNET, SSH, SNMP
VLANSSupports up to 4K VLANs simultaneously (out of 4096 VLAN IDs); Port-based VLAN; 802.1Q tag-based VLAN
Port ManagementEnable/Disable Port, Speed, Duplex, MTU Setting, Flow Control, Mirroring, In/Out Direction, Speed Limit
STPStandard Spanning Tree (STP) 802.1d Rapid Spanning Tree (RSTP) 802.1w Multiple Spanning Tree (MSTP) 802.1s
Ring Network ProtocolERPS (Ethernet Ring Protection Switching)
Link AggregationStatic/Manual Aggregation, LACP Dynamic Convergence
IGMP v1/v2/v3 snoopingIGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups
MAC ManagementAdd/Delete, MAC Address learning limit, Dynamic Aging Time Setting
Layer 3 Switching FunctionsVirtual VLAN Interface, ARP, Static Router
ACL (Access Control List)Based on source MAC, destination MAC, prototcol type, source IP, destination IP, L4 port number. Support
QOS (Quality of Service)802.1p(COS) Classification, DSCP Classification, Source IP/Destination IP/Port Number Classification.
Anti-Attack SupportDOS Defense CPU Protection, limit message send rate ARP Binding (IP, MAC, PORT)
Other FunctionsLLDP, Add/Delete Users, Log user login/operation/status/events, Port security (Dying Gasp/SNMP Trap), Device Reset,
Jumbo Frame Support9.6K
Switching Capacity18 Gbps
Packet Forwarding Rate13.39Mpps
Forwarding ModeSave and forward
Package Cache4M
RAM / Flash128MB / 16MB
Address Table8K MAC, self-learning
Network Protocols and Standards SummaryIEEE 802.3i 10BASET, 802.3u 100BASET, 802.3z 1000BASET 802.3x Flow Control 802.3ab Gigabit Media Independent Interface (GMII) 802.1q VLANs 802.1p (QOS) 802.3ad Link Aggregation Control Protocol (LACP) 802.3af /at /bt (PoE) 802.3az Energy-Saving IEEE G.8032 Ethernet ring protection (<50ms) (STP) 802.1d, (RSTP) 802.1w, (MSTP) 802.1s
Other Industry StandardsEMI: FCC Part 15, CISPR (EN55032) class A EMS: EN61000-4-2 (ESD), EN61000-4-4 (EFT), EN-61000-4-5 (Surge) Shock: IEC 60068-2-27 Free Fall: IEC 60068-2-32 Vibration: IEC 60068-2-6
Environmental ProtectionIP40
Operating Temp40 to +85°C (-40 to 185°F)
Operating Humidity (RH)5% - 95% (non condensing)
Storage Temperature-40 to +85°C (-40 to +185°F)
MTBF100,000 hours
CertificationsCE, FCC, RoHS
Dimensions (LxWxH)155*117*38(mm) (6.1 x 4.6 x 1.5”)
Weight0.6kg (1.25lb)
Warranty5 Years

Reviews

Ratings & Reviews

No reviews available

Be the first to Write a Review