• Home
  • Ubiquiti Fiber + Power Solution for Outdoor PoE Devices

Ubiquiti Fiber + Power Solution for Outdoor PoE Devices

(0) No Reviews yet
  • SKU: F-POE
  • Manufacturer: Ubiquiti Networks
  • Data Sheet: Download
  • Availability: Open chat or call usEmail me when this product is in stock!
$35.00

Specifications F-POE

Dimensions 196.4 x 93.5 x 32.4 mm
( 7.73 x 3.68 x 1.28")
Weight 288 g (10.2 oz)
Enclosure White Polycarbonate
Interface Connections (1) 1 Gbps SFP Port (1) DC Terminal Block (1) DC RJ45 Port DC Injection (1) 1000 Mbps Ethernet PoE Port
Typical Power Consumption 1.5W
Power Method DC Terminal Block, 2-Wire, 24VDC or 50VDC DC In RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24VDC Input), or 4-Pair (24VDC or 50VDC Input) Passthrough PoE RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24VDC Input), or 4-Pair (24VDC or 50VDC Input) PoE Passthrough
PoE Output PoE RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24VDC), or 4-Pair (24VDC or 50VDC) PoE
DC Output Terminal Block, 2-Wire (24VDC or 50VDC)
Input DC Voltage 16 to 57V
LED White: Power On Blue: Connected Blue (Flashing): Activity
Operating Temperature -30 to 60° C (-22 to 140° F)
Operating Humidity 10 to 95% Noncondensing
ESD/EMP Protection ± 24KV Contact / Air for Ethernet
Certifications CE, FCC, IC

Ubiquiti FiberPoE

Fiber + Power Solution for Outdoor PoE Devices

Overcome PoE limitations with the FiberPoE™. The FiberPoE is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device. Deployments with the FiberPoE also provide significant EMI and ESD protection over typical PoE installations.

Separate Data and Power Transport

PoE is ideal for indoor or short-run installations. However, for outdoor, long-distance installations, PoE becomes vulnerable to EMI and is limited to 100 meters with correlated power loss. With the FiberPoE, data and power are transported on separate cables to greatly improve data integrity and enable much longer cable runs.

The FiberPoE provides Gigabit bi-directional data transport between twisted-pair Ethernet cable and fiber optic cable, and injects DC power to the Ethernet cable for passive PoE. Use one FiberPoE device as an Fiber‑to‑Ethernet Converter, or a pair of FiberPoE devices to create a Fiber Bridge.

Fiber Optic Data Transport

Using fiber optic cable for data transport significantly reduces electrostatic discharge (ESD) failures and electromagnetic interference (EMI). Data integrity is also sustained in runs beyond 100 meters, the limit of Ethernet over twisted-pair cable.

The FiberPoE supports a 1G SFP module and 24V or 50V power from a DC power cable or PoE cable.

Ratings & Reviews

No reviews available

Be the first to Write a Review