Ubiquiti 5GHz NanoBeam ac Gen2 CPE 19dBi
|Dimensions (Mount Included)||189 x 189 x 125 mm (7.44 x 7.44 x 4.92")|
|Weight (Mount Included)||0.530 kg (1.17 lb)|
|Power Supply||24V, 0.5A Gigabit PoE Adapter (Included)|
|Operating Frequency||Worldwide 2412 - 2472 MHz 5150 - 5875 MHz, USA: 2412 - 2462 MHz|
|Max. Power Consumption||8.5W|
|Networking Interface||(1) 10/100/1000 Ethernet Port Wi-Fi for Management|
|Processor Specs||Atheros MIPS 74Kc, 720 MHz|
|Memory||128 MB DDR2, 8 MB Flash|
|LEDs||Power, Ethernet, (4) Signal Strength|
|Signal Strength LEDs||Software-Adjustable to Correspond to Custom RSSI Levels|
|Channel Sizes||PtP Mode 10/20/30/40/50/60/80 MHz |
PtMP Mode 10/20/30/40 MHz
|Enclosure||Outdoor UV Stabilized Plastic|
|Mounting||Pole-Mount (Kit Included), Wall-Mount|
|Wind Loading||45.4 N @ 200 km/h (10.2 lbf @ 125 mph)|
|Wind Survivability||200 km/h (125 mph)|
|ESD/EMP Protection||Air: ± 24 kV, Contact: ± 24 kV|
|Operating Temperature||-40 to 80° C (-40 to 176° F)|
|Operating Humidity||5 to 95% Noncondensing|
|Certifications||CE, FCC, IC|
|Salt Fog Test||IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5|
|Vibration Test||IEC 68-2-6|
|Temperature Shock Test||IEC 68-2-14|
|UV Test||IEC 68-2-5 at 40° C (104° F), Equivalent: ETS 300 019-1-4|
|Wind-Driven Rain Test||ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5|
Ubiquiti Networks 5GHz NanoBeam ac Gen2 CPE 19dBi
High-Performance airMAX® ac Bridge
Incorporating innovative industrial design with proprietary airMAX® ac technology, the NanoBeam® AC is ideal for CPE deployments requiring maximum performance from the smallest possible footprint.
Management Wi-Fi Radio
The NanoBeam® AC integrates a separate Wi-Fi radio for fast and easy setup using your mobile device.
Improved Surge Protection
The NanoBeam® AC features enhanced protection against ESD events.
Ubiquiti's airMAX® engine with custom IC dramatically improves TDMA latency and network scalability. The custom silicon provides hardware acceleration capabilities to the airMAX scheduler, to support the high data rates and dense modulation used in airMAX ac technology.
Incredible Antenna “Beam” Performance
The form factor of the NanoBeam® AC features the highest gain for its size. The NanoBeam AC’s excellent beam directivity provides the best performance in high-noise environments.
airMAX® ac products offer improved latency, noise immunity, scalability and significantly increased throughput performance.
Advanced Software Technology
Ubiquiti’s airMAX® technology is proven in millions of deployments worldwide, exhibiting outstanding performance in outdoor environments. The TDMA airMAX protocol enables unprecedented scalability, high throughput and low latency in unlicensed, multipoint networks.
Plug and Play Installation
The NanoBeam® AC mounts to a variety of surfaces including poles or walls, and offers the freedom of three-axis alignment. No screws are required for pole-mounting, and only a single wall screw (not included) is required for wall-mounting.
Now with airOS®8
airOS®8 provides powerful features, including airMAX® ac protocol support, real-time RF analytics, and an all-new design for enhanced usability.