WiFi Texas PoE for POS Systems, Monitors and Intel NUC
|Cable connectors||RoHS, CE|
|Connector Types||RJ45/2.1mm x 5mm DC|
|Data + PoE Ports||1 - Input|
|Data Rate||10/100/1000 Gigabit|
|DC connector||5.5 x 2.1 mm DC Female|
|Dimensions||4.5 x 2 x 1 in|
|Input Voltage Range||44-56v DC|
|LEDs Per Port||2|
|Max Amps Per Kit||1.3 Amps|
|Max Power for Kit||25 Watts|
|Max Voltage||19 Volts|
|Operating Humidity||10 -90% non condensing|
|Operating Temperature Range||0 - 40C|
|Output Voltage||19 volts|
|PoE Standard||IEEE 802.3at/PoE+|
WiFi Texas GAT-19V25W
Gigabit, Mode A/B inline splitter converts 44-56 volts PoE to 19 volt 25 watt output on a 2.1 mm DC female barrel
Finally, PoE for 25 watt 19 volt applications has arrived! You can power your 19 volt devices like POS systems, signage, small laptops and monitors.
The GAT-19v25w splitter works with 802.3at PoE (PoE+) or our WS-GPOE-1-48v30w to provide 25 watts of continuous 19 volt power to any device. Use with your existing PoE+ Switch or 48v PoE Injector to power 19 volt non-PoE devices. Compatible with POS systems, laptops, monitors and compatible with small computers like intel NUC.
- RJ-45 connectors, one female for POE power plus data in, one data out without power.
- Input voltage range 44v to 56v
- 2.1mm x 5.5mm DC power plug standard output
- Output voltage 19v 1.3 Amp for one device
- Data rate is 10/100/1000
- No power supply nor injector is included – see our 48v injector and switch products.