• Home
  • WiFi Texas POE Tester and Detector Bundle

WiFi Texas POE Tester and Detector Bundle

(0)No Reviews yet
  • SKU: POE Tester and Detector Bundle
  • Manufacturer:

Out of Stock

 Open chat or call us for stock status

Product Information

WiFi Texas POE Tester and Detector Bundle

PoE Tester and Detector Bundle

Get two of our best-selling PoE tools for one low price. Keep the PoE Tester in your toolbox for when you need to check voltage, current, and power consumption on your Ethernet runs. The PoE Detector fits easily on your keychain and quickly lets you know if PoE is present, and if so, what type of PoE.

About the PoE Tester

The WS-PoE-Tester from PoE Texas belongs in every tool kit. Test PoE cameras, VOIP phones, and WiFi installations. When placed in-line between your PoE injector or switch and the powered device, the WS-PoE-Tester will display the voltage available, current, and power consumption.

Use this tool to troubleshoot PoE issues

  • See how much power any PoE or DC powered device actually uses
  • Measure available voltage at the remote end of a PoE connected device
  • Observe line loss in Ethernet cable runs
  • Use the 2.1mm DC connectors to measure voltage and current / power in 24, 48 and 56 volt installations
  • Measure PoE currents up to 500 ma (28 watts) and DC current up to 5 amps

PoE Tester Product Features

  • Bright LED displays - alternate between Voltage, Current and Power
  • Mode A display from 20v to 56 volts
  • Mode B display from 20v to 56 volts
  • DC input display from 5v to 56 volts
  • 2.1mm to 2.1mm jumper included

About the PoE Detector

A must-have companion to our PoE Tester, the PoE Detector quickly indicates the type of PoE on a cable

  • Detects and identifies IEEE 802.3af/at, 24 volt passive
  • Compatible with reverse polarity Mode B for Cambium or Canopy.
  • Ergonomic design fits comfortably between two fingers
  • easy-to-see LED display lights
  • PoE powered, no batteries required


Specifications PoE Tester and Detector Bundle

Data Rate Gigabit (Tester), N/A (Detector)
Dimensions 4x4x2 in. (Tester), 2x1x0.75 in (Detector)
Operating Humidity 5% to 90%
Operating Temperature Range -10 - 60C
PoE Method Passive (Tester), Powered by PoE (Detector)
PoE Standard 802.3af/at (Tester), IEEE 802.3af, at, 24 Volt Passive, 48/56 Volt Passive, Reverse Mode B (Detector)
Power Input 2.1mm DC (Tester), Not Required (Detector)
Weight 5oz (Tester), 1.5 oz (Detector)


Ratings & Reviews

No reviews available

Be the first to Write a Review