WiFi Texas WS-GPOE-16-48v240w
Gigabit Passive PoE 16 Port Power over Ethernet Injector for PoE Cameras, IP Phones, Wifi Access Points, Includes 48 Volt Power Supply 120 watts- upgradeable to 240 watts
Power IP cameras, desktop phones, WiFi access points, or other low voltage devices through a network data cable using this Power over Ethernet (PoE) injector. The PoE Injector takes power from the 48 volt power supply and adds it to the Ethernet data cable (Cat5, Cat5e, Cat6) to your device.
Save big on network upgrades and device installations Power over Ethernet delivers power 328 feet from the PoE Injector, eliminating the expense and hassle of installing AC power near your powered device. With this PoE Injector, you can add power to your data cable for a fraction of the cost of upgrading to a PoE capable network switch.
Passive PoE means versatility . A Passive PoE injector always delivers the same voltage as its power source. Pair this injector with a 48 volt DC power supply to power devices labeled “802.3af”, or you can use a 24 volt power supply with 24-volt passive PoE devices like Access Points from Mikrotik, Ubiquiti, and many more.
- Fanless Gigabit Power over Ethernet injector, 16 shielded RJ45 ports, 1U rack mount, with 48 volt power supply 240 watts
- For 802.3af devices like IP Phones, WiFi Access Points and PoE Cameras that use PoE. 10/100 or gigabit speeds.
- Compatible with Polycom, Yealink, Cisco (802.3af), etc - all PoE device. See the WT-AT-16-1u for Meraki and Cisco 802.3at Compatible Injector
- Add PoE to any switch, mix 10/100 and gigabit devices, see also our PoE solutions up to 24 ports
|Data + PoE Ports
|Max Amps Per Kit
|Max Power for Kit
|Max. Amps Per Port
|5% to 90%
|Operating Temperature Range
|-10 - 60C
|Mode A (-1,2 +3,6)
|2.1mm DC x2
|WS-PS-48v120w x 2