WiFi Texas Gigabit 16 port PoE Injector with dual 48 volt 120 watt power supplies
|Data + PoE Ports||16|
|Max Amps Per Kit||2.5 Amps|
|Max Power for Kit||240 Watts|
|Max. Amps Per Port||650 mA|
|Operating Humidity||5% to 90%|
|Operating Temperature Range||-10 - 60C|
|Output Voltage||48 volts|
|PoE Mode/Pinout||Mode A (-1,2 +3,6)|
|Power Input||2.1mm DC x2|
|Power Supplies||WS-PS-48v120w x 2|
WiFi Texas GPOE-16A-48V240W
Gigabit 16 port PoE Injector with dual 48 volt 120 watt power supplies
Power IP cameras, desktop phones, WiFi access points, or other low voltage devices through a network data cable using this Power over Ethernet (PoE) injector. The PoE Injector takes power from the 48 volt power supply and adds it to the Ethernet data cable (Cat5, Cat5e, Cat6) to your device.
Save big on network upgrades and device installations Power over Ethernet delivers power 328 feet from the PoE Injector, eliminating the expense and hassle of installing AC power near your powered device. With this PoE Injector, you can add power to your data cable for a fraction of the cost of upgrading to a PoE capable network switch.
Passive PoE means versatility . A Passive PoE injector always delivers the same voltage as its power source. Pair this injector with a 48 volt DC power supply to power devices labeled “802.3af”, or you can use a 24 volt power supply with 24-volt passive PoE devices like Access Points from Mikrotik, Ubiquiti, and many more.