WiFi Texas Gigabit 16 port PoE Injector with 56 volt 120 watt power supply
|Data + PoE Ports||16|
|Max Amps Per Kit||2 Amps|
|Max Power for Kit||120 Watts|
|Max. Amps Per Port||650 mA|
|Operating Humidity||5% to 90%|
|Operating Temperature Range||-10 - 60C|
|Output Voltage||56 volts|
|PoE Mode/Pinout||Mode A (-1,2 +3,6)|
|Power Input||2.1mm DC x2|
WiFi Texas WS-GPOE-AT-16-56v120w
Gigabit, Mode A, rack mount 16 Port Injector with a 56 volt 120 watt power supply
The WS-GPOE-AT-16-56v120w Gigabit Power over Ethernet injector allows you to power up to 12 devices remotely over ethernet wiring up to 328 ft (100 meters) away.
Use these passive 56 volt 802.3at compatible Power over Ethernet injectors with high-powered devices like PTZ cameras and non-Cisco WiFi-Access points. For Cisco devices, see our Active injectors (WT-AT-4 and WT-AT-8).
Save big on network upgrades and device installations Power over Ethernet delivers power 328 feet from the PoE Injector, eliminating the expense and hassle of installing AC power near your powered device. With this PoE Injector, you can add power to your data cable for a fraction of the cost of upgrading to a PoE capable network switch.
Passive PoE means versatility . A Passive PoE injector always delivers the same voltage as its power source. Pair this injector with a 48 volt DC power supply to power devices labeled “802.3af”, or you can use a 24 volt power supply with 24-volt passive PoE devices like Access Points from Mikrotik, Ubiquiti, and many more.