WiFi Texas Gigabit 8 port PoE switch with 24 volt 60 watt power supply
|Data + PoE Ports||7|
|Max. Amps Per Port||650 mA|
|Operating Humidity||5% to 90%|
|Operating Temperature Range||-10 - 60C|
|Output Voltage||24 volts|
|PoE Mode/Pinout||Mode A (-1,2 +3,6)/Mode B (+4,5 -7,8)|
|Power Input||2.1mm DC|
WiFi Texas WS-GPOES-8-7-24v60w
Gigabit 8 port 10/100/1000 PoE Switch with 7 Injector ports and 24 volt 60 watt power supply
Power 24 volt IP cameras, desktop phones, WiFi access points, or other low voltage devices from brands like Ubiquiti and Mikrotik through a network data cable. This passive Power over Ethernet (PoE) network switch takes power from the included DC power supply and adds it to the Ethernet data cable (Cat5, Cat5e, Cat6) to power your device.
Simplify your installations. One data cable in, up to 7 out. Run a single Ethernet cable up to 328 feet (100 meters) from your existing modem or router and connect to the switch to provide power and data to as many as 7 devices. You can even run them in a series to extend your data reach to more than 600 feet.
Passive PoE means versatility . A Passive PoE injector always delivers the same voltage as its power source. Use this switch with the included 24 volt power supply to power 24-volt passive PoE devices like Access Points from Mikrotik, Ubiquiti, and many more, or swap it with a 48 volt DC power supply (sold separately) and power devices labeled “802.3af”.