WiFi Texas Gigabit 8 port PoE switch 48 volt 60 watt power supply
|Data + PoE Ports||7|
|Max. Amps Per Port||650 mA|
|Operating Humidity||5% to 90%|
|Operating Temperature Range||-10 - 60C|
|Output Voltage||48 volts|
|PoE Mode/Pinout||Mode A (-1,2 +3,6)/Mode B (+4,5 -7,8)|
|Power Input||2.1mm DC|
WiFi Texas WS-GPOES-8-7-48v60w
Gigabit 8 port 10/100/1000 PoE Switch with 7 Injector ports and 48 volt 60 watt power supply
Power IP cameras, desktop phones, WiFi access points, or other low voltage devices through a network data cable using this passive Power over Ethernet (PoE) capable network switch. The PoE switch takes power from the included DC power supply and adds it to the Ethernet data cable (Cat5, Cat5e, Cat6) to power your device
Simplify your installations. One data cable in, up to 7 out. Run a single Ethernet cable up to 328 feet (100 meters) from your existing modem or router and connect to the switch to provide power and data to as many as 7 devices. You can even run them in a series to extend your data reach to more than 600 feet.
Passive PoE means versatility . A Passive PoE switch always delivers the same voltage as its power source. Pair this switch with the included 48 volt DC power supply to power devices labeled “802.3af”, or you can swap it with a 24 volt power supply to power 24-volt PoE devices like Access Points from Mikrotik, Ubiquiti, and many more.