WiFi Texas 16 port 1U Rack mount 10/100 shielded injector, 48V, 120W
- SKU: POE-16-48v120w
- Manufacturer: PoE Texas
- Data Sheet: Download
Product Information
WiFi Texas WS-POE-16-48v120w
10/100, Mode B, rack mount 16 Port Injector with a 48 volt 120 watt power supply
The WS-POE-16-48v120w Power over Ethernet (POE) injector provides power to as many as 16 devices from a central power source up to 328 ft (100 meters) away. Use this device to inject power into the CAT-5, CAT-6 or CAT-7 cable and power devices such as cameras, VOIP phones, and WiFi access points.
The injector works works with any ethernet switch or router. The 48 volt 120 watt power supply provides 48 volts to all ports, and 120 watts is the total available power for all devices. Minus the auto-negotiation of 802.3af, this kit will power your 802.3af or 802.3at devices with always on power. If the device shows “12v, PoE†on the data sheet – this means that the device uses 12v when powered from a transformer – and 48v when powered via Ethernet.
Features:
- 48 volts DC power supply included
- 120 Watts max power load
- 2.1mm x 5.5mm DC input Jack
- Data pairs for each RJ45 – 1 and 2, 3 and 6 pass thru LAN to POE
- + 48 volts on pins 4 and 5
- Return voltage on pins 7 and 8
- 10/100 data rates supported
- 12x self resetting 650 ma fuses limit load to 30 watts per port
- Rack Mount – 1U high 19 inch standard
- 19 x 1.75 x 1 inches
Specifications
Specifications POE-16-48v120w
Input Voltage | 90-260VAC @ 47-63Hz |
Efficiency | 90+% |
Output Ripple | 1% Max |
Line Regulation | +/- 0.5% |
Load Regulation | +/- 1% |
Operating Temperature | -10C to +60 deg C |
Storage Temperature | -20C to +85 deg C |
Operating Humidity | 5% to 90% non condensing |