Product Information
WiFi Texas WS-POE-24-1U
10/100, Mode B, Rack Mount 24 Port Injector (power supply sold separately)
Power an IP camera, desktop phone, WiFi access point, or other low voltage devices through a network data cable using this Power over Ethernet (PoE) injector. The PoE Injector takes power from a DC power source (power supply sold separately) and adds it to your Ethernet data cable (Cat5, Cat5e, Cat6) to your device.
Save big on network upgrades and device installations Power over Ethernet delivers power 328 feet from the PoE Injector, eliminating the expense and hassle of installing AC power near your powered device. With this PoE Injector, you can add power to your data cable for a fraction of the cost of upgrading to a PoE capable network switch.
Passive PoE means versatility . A Passive PoE injector always delivers the same voltage as its power source. Pair this injector with a 48 volt DC power supply to power devices labeled “802.3af”, or you can use a 24 volt power supply with 24-volt passive PoE devices like Access Points from Mikrotik, Ubiquiti, and many more.
Features:
- Rack Mountable
- Use with any 24v or 48v power supply
- Can be used with any PoE or non-PoE switch
- Includes a LED power display
- 2.1 mm x 5.5 mm DC plug (1)
- Mode B input pins: 4&5 (+) and 7&8 (-)
- 650 ma au tomatic resettable fuses on each port
- Operating temperature: 0°C ~ 65°C
Specifications
Specifications WS-POE-24-1U
| Data + PoE Ports | 24 |
| Data Ports | 24 |
| Data Rate | 10/100 |
| Dimensions | 20x4x1.75 in. |
| Max. Amps Per Port | 650 mA |
| Mount Type | rack |
| Operating Humidity | 5% to 90% |
| Operating Temperature Range | -10 - 60C |
| PoE Method | Passive |
| PoE Mode/Pinout | Mode B (+4,5 -7,8) |
| Power Input | 2.1mm DC, screw termin.al |