WiFi Texas 5 Volts 10 Watts Output WT-AF-5v10w microUSB

WiFi Texas WT-AF-5v-MicroUSB

The WT-AF-5v-MicroUSB splitter works with 802.3af Power over Ethernet to provide 5 volt power with up to 10 watts peak output.

Features:

• 5 volt 10 watt Power over Ethernet PoE splitter, for up to 328ft via
• Ethernet cable - requires a 802.3af PoE switch or 48v injector
• Regulated 5 volt power regardless of distance for any PoE or PoE+ switch or injector
• for Android Tablets, Dropcam, Raspberry Pi - Micro USB left angle (see photo)
• 10/100/1000 compatible data rates - gigabit Ethernet for Raspberry via RJ45 connector

Remote Power for MicroUSB devices with up to 10 watts

Use this Splitter to power any USB device remotely

• Extend power to 328 ft with Cat-5e or CAT-6 cable
• compatible with 802.3af mode A or mode B or both, any polarity, 568A or 568B pinouts
• 802.3af to 5 volt 10 watt splitter with 1.35 x 3.5mm male dc plug
• Includes microUSB Left-Angle (see photo) adapter from 1.35mm female
• RJ45 female input power and data
• RJ45 male output data only - 10/100/1000 data rates
• Supports all 802.3af modes
• Used with PoE switches 802.3af or 802.3at or passive Injectors with 48 to 56 volts
• Mix 5v and 12v and 802.3af on the same PoE switch or injector
• These devices use power from the ethernet cable. The splitter at the USB device lowers the voltage to 5 volts to operate the device
• 250 ma from the 802.3af side produces 2 amps on the 5v side