WiFi Texas Gigabit 16 port PoE Injector with 48 volt 120 watt power supply
WiFi Texas WT-AT-16-48V120W
Gigabit 16 port PoE Injector with 48 volt 120 watt power supply.
Add 802.3at power to any switch Save big on network upgrades by using this injector to add 802.3at Power over Ethernet without upgrading to a more expensive network switch.
Power IP cameras, desktop phones, WiFi access points, and more This 802.3af/at compliant Power over Ethernet (PoE) injector takes power from the included 48 volt DC power supply and adds it to an Ethernet data cable (Cat5, Cat5e, Cat6) to power your PoE devices.
Active PoE means the right power at the right time An active PoE injector negotiates with the powered device to deliver the power as needed, so there are no concerns about accidentally burning out lower powered or non-PoE devices. Power is only added to the data cable when an 802.3af or 802.3at device is connected.
|Certifications||UL/CE/FCC (Power supply)|
|Data + PoE Ports||16|
|LEDs Per Port||1|
|Max Amps Per Kit||2.5 Amps|
|Max Power for Kit||120 Watts|
|Max. Amps Per Port||650 mA|
|Operating Humidity||5% to 90%|
|Operating Temperature Range||-10 - 60C|
|Output Voltage||48 volts|
|PoE Configurable Per Port||No|
|PoE Mode/Pinout||Mode A (-1,2 +3,6)|
|PoE Standard||IEEE 802.3af/at|
|Power Input||2.1 mm DC and Phoenix Connector 1840382|