WiFi Texas Gigabit 16 port PoE Injector with dual 56 volt 120 watt power supplies
- SKU: WT-AT-16-56V240W
- Manufacturer:
- Data Sheet: Download
Product Information
WiFi Texas WT-AT-16-56V240W
Gigabit 16 port PoE Injector with dual 56 volt 120 watt power supplies
16 Port Active PoE Injector for High Powered Devices like Cisco WiFi APs
Power IP cameras, desktop phones, WiFi access points, and more This 802.3af/at compliant Power over Ethernet (PoE) injector takes power from the included 56 volt DC power supplies and adds it to an Ethernet data cable (Cat5, Cat5e, Cat6) to power your PoE devices.
Active PoE means the right power at the right time An active PoE injector negotiates with the powered device to deliver the voltage needed, so there are no concerns about accidentally burning out lower powered or non-PoE devices. Power is only added to the data cable when an 802.3af or 802.3at device is connected.
Save big on network upgrades and device installations Power over Ethernet delivers power 328 feet from the PoE Injector, eliminating the expense and hassle of installing AC power near your powered device. With this PoE Injector, you can add power to your data cable for a fraction of the cost of upgrading to a PoE capable network switch.
Specifications
Specifications WT-AT-16-56V240W
Certifications | N/A |
Data + PoE Ports | 16 |
Data Ports | 16 |
Data Rate | Gigabit |
Dimensions | 19x2x1.75 in. |
LEDs Per Port | 1 |
Max Amps Per Kit | 4 Amps |
Max Power for Kit | 240 Watts |
Max. Amps Per Port | 650 mA |
Mount Type | Rack |
Operating Humidity | 5% to 90% |
Operating Temperature Range | -10 - 60C |
Output Voltage | 44 volts to 56 volts |
PoE Configurable Per Port | No |
PoE Method | Active |
PoE Mode/Pinout | Mode A (-1,2 +3,6) |
PoE Standard | IEEE 802.3at |
Power Input | 2.1 mm DC and Phoenix Connector 1840382 |
Power Supplies | WS-PS-56v120w x 2 |